14 2 mc for sale, brand-new and used.

Description The USB C8051F Debugger provides the interface between the PC's USB port and the target device's in-system debug/programming circuitry. The attached 10-pin DEBUG ribbon cable connects the adapter to the target board and the target device's debug interface. The USB C8051F Debugger supports both Silicon Laboratories JTAG and C2 debug interfaces.

General Description 1.support target system using 5.0V TTL,3.3V,2.5V LVTTL/LVCMOS . 2.Use newest firmware REV.C. 3.Use HIGH SPEED scheme, not 68013(low speed).

OverV

9DOF IMU with ITG3200/3205+ADXL345+HMC5883L+ATMEGA328

I.An PIC16F877A chip is already on this board~~~ II.This board is also fit for most PIC DIP40 MCU,like PIC16F877,PIC18F45

B

Description Microchip's PICkit3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. The MPLAB PICkit3 allows debugging and programming of PIC? and dsPIC?

What is easyPIC-40™? The easyPIC-40 is a demonstration and development platform for Microchip’s 8/16-bit microcontrollers with 40PINOUTs. The board provides a platform to highlight this new family’s benchmark for lower power consumption and high-performance operation.

?

Why ReadyAVR-64? Proto area Easily add additional components for your further design Comes with Atmega128A ReadyAVR-64 comes with ATmega128A newest microcontroller, which is a great choice for projects of both beginners and professionals. Bootloader inside Having fast UART bootloader inside.

A STM8 Programmer is especially for volume production.

CC-DEBUGGER Debugger and Programmer for RF System-on-Chips

Ethernet Shield W5100 for Arduino 2009, UNO, Mega 1280 and Mega 2560 This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Board Online. Fits all version of Arduino Main Board. Includes: Arduino 2009, Arduino UNO, Arduino Mega 1280 and Arduino Mega 2560 Specifications

Features: Brand new and high quality. This is a basic 16 character by 2 line black-on-green display. Utilizes the extremely common HD44780 parallel inter

Devices Supported Device support is dependent on the device file version installed with the PICkit 2 device programmer. For the versions listed above device support is listed below. When selecting a part using the "P" option (section 9), use the full name from the list below.

start_elivehelp_btncode end_elivehelp_btncode

Make: Magnepull Model:

Electronic Component

Lot of (2) Bussman Super Lag RES-60 Fuse 600V 60A RES-40 40A This is a