The Everbilt 1/2 HP A370-4/6F1B2 is thermally protected and features a 4 pole Motor for energy efficiency and savings. It is built for reliable performance in 115-Volt evaporative (swamp) coolers. Ideal as a replacement motor for an existing unit.
Condenser Motor - 1/6 hp 208-230/1/50-60 (1075 rpm/1 speed) 51-102500-02 Technical Data: HP: 1/6 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 220 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 50 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 3/370 FLA at 230V (A): 0.86 LRA at 230V (A): 2.50 Shaft Diameter (in.): 1/2 Moto
Condenser Motor - 1/10 hp 208-230/1/60 (825 rpm/1 speed) 51-100999-02 Technical Data: HP: 1/10 No. of Speeds: 1 High Speed (RPM): 825 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 3/370 FLA at 230V (A): .75 LRA at 230V (A): 1.19 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Len
This super winch can be permanently mounted using the included two-bolt pattern mounting plate. Its efficient low draw 1.2 hp PM motor easily attaches to, and is powered by your car battery or an auxiliary 12-volt battery if used away from your vehicle. -The motor features a 3,000 lbs line pull rating -Circuit breaker protection -Both load in and load out drum rotat
GE 100 hp TEFC Encl Double End C-Face Electric Motor GE Motors & Industrial Systems 100 hp TEFC Encl Double End C-Face Electric Motor, 1190 rpm, Frame 444TSCZ (replacement used stock motor for Prince 1200-Ton die cast machine hydraulic system) Energy Saver XSD Extra Severe Duty AC Motor
GOULDS MODEL 3656 CAST IRON PUMP WITH 3 HP BALDOR MOTOR NEW OLD STOCK (LINK TO INSTRUCTIONS AND SPECS) http://www.grainger.com/ec/pdf/GOULDS-WATER-TECHNOLOGY-Models-3656-and-3756-Operating-Manual.pdf?cm_mmc=PJX-_-GraingerBrand-_-43737-_-Generic SHIPPING WT. 120 LBS. PUMP PRM#: PUMPGOULD16BF2H5E0 PUMP INFORMATION; BRAND: GOULD MODEL # 3656
Gatemotors would like to thank you for taking the time to visit our eBay auction. We are a U.S. Based international wholesaler of security equipment specializing in Gate Operators, Access Control Equipment, Parking Systems, Surveillance / CCTV Equipment, Magnetic Locks and Electric Strikes.
The Heck Industries 5000 Bevel-Mill Plate is an electrically powered handheld machine that provides a 5/16" maximum burr-free bevel on most materials with a minimum thickness of 1/8", and is made in the USA. The 2 Beveler hp, 110V motor enables beveling at approximately 3 feet per minute on mild steel without creating dust, fumes, or heat. It is powered using the included 6-ft.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
