156/4 for sale, brand-new and used.

WE ARE SELLING A USED DAYTON AC GEARMOTOR PARALLEL SHAFT 115/230 VOLTS AC 156RPM MODEL# 6Z822A WITH AN ATTACHED GEAR, !! THIS MOTOR IS MISSING THE COVER PLATE TO THE WIRING I DO NOT HAVE THAT AVAILABLE!!! Item AC Gearmotor Type: Parallel Shaft Voltage Rating: 115/230 Phase: 1 Hz: 60/50 Shaft Orientation: Parallel Nameplate RPM: 156 Full Load Torque (In.-Lbs.): 60 Overhung Load (Lb.): 175 Input HP: 1/6 Gear Ratio: 11:1 Full Load Amps: 2.1/1.1 Enclosure: TEFC Thermal Protection: None Ambient

Click to Enlarge

Nidec 12 V DC Brushless Motor Dual Ball Bearing Inner Rotor Internal Drive Specification: Motor Diameter: 35.8 MM Motor height: 40 MM Motor Weight: 156 g Output shaft: 4 MM Front axle length: 31 MM Rear axle length: 26 MM Cable length: about 150 MM Theoretical lifetime: 50,000 hours Note: Connection: Red wire=positive, blue and black wires =negative. (Can not wrong connect, If wrong connect, will damage the motor driver board) Test: Voltage: 7.2V Current: 0.14 A Speed: 1400 rpm Vol

New Old Stock DC Panel Meter - 0-500 Volts Face is 1.75 Inches x 1.75 Inches

LFE Instruments Ammeter 0-400 DC Amperes P/N 405521-5 Specifications: Part: 405521-5 / Alt.

Text Panel 7Keys 3.7" 192*64 Yellow-Green STN OP320 with programming cable New DHL FREESHIP OP320 Configuration software: (free English versions)

You are bidding on a Crossing Automation power source. Model# 1000CA-M/A93962 Includes: 4 pieces Allen Bradley power supply Model# 1606-XLS480E 480 watt 22-24VDC 1 piece Allen Bradley power supply Model# 1606-XLPOther assorted contactors, breakers, filters, and fuses This item is New in an open box. Includes manuals for Allen Bradley pieces.

Janome JR 2200N 2203N Mini XYZ Soldering/Dispensing Robot Includes Teach pendant and Dispensing tool as pictured 200mm x 200mm x 50mm reach with 0.005mm repeatability! This was pulled from a working setup. We were able to program a short routine and run the program.

4 X 15A Long Lever Microswitches AC250V Micro Switches

The item available here is a used R + W TORQUE LIMITER WITH CLAMPING HUB that appears to be in EXCELLENT CONDITION. This item has not been tested and it comes with a 14 day return policy from the date the item was shipped, EXCEPT INTERNATIONAL SHIPPING. Postage is not covered.

CDR-156 NIB PLEASE SEE PICTURE FOR MORE INFO PLEASE FEEL FREE TO ASK ANY QUESTIONS COMES WITH 30 DAY WARRANTY AND FREE SHIPPING TO LOWER 48, AK/HI/PR WILL BE AN EXTRA CHARGE WE ADD NEW ITEMS WEEKLY TO STORE SO CHECK BACK OFTEN UNIT MY BE SEEN OR PICKED UP AT HOLLAND EQUIPMENT RECOVERY SALES 3345 60TH ST HAMILTON MI, 49419

Catalog Number: EM3714T-G

Up for bid is a new in the box Whittet-HIggind Bearhug locknut model # BH-16 thread: 3.137-12 OD: 4.156 Axial Load Pounds: 38200 Thanks for Looking

LARK ENGINEERING CO., ATTENUATOR,VARIABLE MODEL MT-511 NSN 5985-00-476-8271 US ARMY P/N10658397 NOS CONDITION. NOT USED. 14 DAY WARRANTY FOR COMPLETE REFUND.

Fluke Calibration 9144-D-156 Dry-Well, High-Temp, W/9144-Insd, 115V New - Factory Authorized Distributor - Factory Warranty Lightweight, portable, and fast Cool to 50C in 35 minutes and Heat to 660C in 15 minutes Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current True reference thermometry with accuracy to +/- 0.01C On-board automation and documentation Recently, we introduced Metrology Wells, which provide the very best performance in portable temperature calibration.

Fluke Calibration 9143-DW-P-156 Dry-Well, No Insert,W/Blt-In Elct 115V New - Factory Authorized Distributor - Factory Warranty Lightweight, portable, and fast Cool to 33C in 32 minutes and Heat to 350C in 5 minutes Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current True reference thermometry with accuracy to +/- 0.01C On-board automation and documentation Recently, we introduced Metrology Wells, which provide the very best performance in portable temperature calibration.

This is a Fluke / Transcat 22207T (Mfg Part #: 9140-A-156) Field Dry-Well Calibrator What you will get: Fluke / Transcat 22207T (Mfg Part #: 9140-A-156) Field Dry-Well Calibrator Insert "A" Power Cord Case Manual

Huber+Suhner 3400.17.0211L EMP/Lightning Protector, Lucent Comcode: 407943133 Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Huber+Suhner and may vary slightly due to upgrades, options, or revisions this unit may or may not have.