17 floor buffer for sale, brand-new and used.

Dust Skirt for most 15, 16, and 17" buffers. Heavy Duty fabric doesn't rip like the original Clarke skirt 10240A works best with the Clarke Rubber Bumper Welcome to Brosson Floor Finishing Solutions!

Diamabrush by Malish 17" Coating Removal Tool For Floor Machines For counter-clockwise machines. The Diamabrush™ Mastic Removal Tool is designed to remove stubborn coatings from concrete such as mastic, carpet or tile adhesive, thin-set and thin mil coatings like urethane or paint. No need to waste time and money on heavy grinding equipment or harmful chemicals.

These 17 inch red pads are typically used with a pad driver that is connected to a 17" floor buffer to buff or scrub a commercially finished floor. On machine speeds between 175 and 350 RPM. Each case contains five 1" thick pads that can be used to remove slight scuff marks and scratches on smooth floors.

This auction is for 10 new sand screens for buffing hardwood floors. These screens are 17" and 220 grit. Please feel free to contact me if you have any questions!

American made dust skirt fits rotary sanders/buffers from 15" up through 17" Fastens to the bottom of your machine using a large hose clamp (see pictures) Bottom brush floats along floor as you're sanding with an attached vacuum and picks up almost all dust. We have sold hundreds of these and they work very well. Any questions - please contact me.

machine is used, good working condition , no pad holders, just the machine,all sales are final, local pickup only ,thanks

This 17" solid aluminum sanding block will fit any 17"-18" buffer. It comes with a metal fastener to hold the sandpaper or any pad in place. The item is in excellent condition and even comes with a good sampling of sandpaper.

MERCURY FLOOR MACHINES 17" 1.5 hp Industrial Scrubber, Buffer, Cleaner.

Honeywell Northern Computers N-1000-IV-X 4-Door Access Controller Board Only I also have security boxes and battery backups for these. Please contact me for more information. The N-1000-IV is an access control panel N-1000 Series Controllers: Versatile, reliable and expandable.

Used older model Pacific Model 17 (17") low speed floor machine, S/N 72528A. It is 3/4 HP and I believe it spins at about 175 RPM. Motor runs, drive spins when handle switch is pulled.

Propane Burnisher/ Buffer. Kawasaki FH541V 17.0 Engine. 498 hours.

Propane Burnisher/ Buffer. Kawasaki FH541V 17.0 Engine. 21in.

Gunn Brush Co is offering a heavy duty ( weighs 12.5 lbs) 16" diameter Sandpaper driver with riser, to fit on your 16" & 17" floor machine for floor sanding. Brand new from inventory, these are heavy duty contractor grade units.This sanding driver allows you to use your floormachine to sand floors with sandpaper, or mesh screens.Heavy duty plywood construction, with a neoprene face.

Propane Burnisher/ Buffer. Kawasaki FH541V 17.0 Engine. 498 hours.27in.

Available for purchase are three Advance Matador Floor Machine. The Matadorwill clean your floor quickly and efficiently. It has a small tank for solution so that while the machine is operated the liquid will flow over your pad and then onto the floor.

17 in floor buffer brush for scrubbing -carpet cleaning top of brush is equipped with channels for even spread of cleaning solution. The clutch plate is 3 1/2 in across between the lug holes and the back of the opening. This should fit most standard size buffers.

Global™ 17" Floor Machine 1.5 HP Product Information GLOBAL FLOOR MACHINES 17" Floor Machine Global all-metal floor machines offer a low speed for use on wet hard floors, tile floors and carpets. Heavy duty 1.5HP motor with triple planetary, all steel gear box transmission for long life and dependable service. Safety lock-out switch on handle with easy access thumb control.

Pulled from retired equipment, all are guaranteed no DOA Many of these are high temp, high reliability ceramic packages 17 IC's total

Thanks for looking!

PBU Kawasaki 27" Propane Floor Buffer/Burnisher Condition: Untested. Signs of wear - See Pictures 17 HP Kawasaki Motor Located in Neshkoro, WI - 1 hour drive from Madison, Stevens Point, Appleton, Fond Du Lac & 45 minutes from Oshkosh Pick Up is preferred. I will ship if you need me to.