CMI RC103 PULLEY Famous original blue pulley. Anodized aluminum sideplates, 2 3/8 inch aluminum sheave, sealed-needle bearing and stainless steel axle. 5/8 inch rope capacity.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
Lagged pulley Mining Grade Drive Pulley Body is 69 inches wide by 37 inches in Diameter Includes 9 and 3/8 inch shaft with SKF bearings number GAF052. Has 2 and 1/2 inch wide keyway Condition is very good with limited use. I will palletize and strap down for no extra charge.
Lagged pulley Mining Grade Body is 72 inches wide by 24 inches in Diameter Includes 5 and 1/2 inch shaft with SKF bearings number 532. Condition is very good with limited use. I will palletize and strap down for no extra charge.
2016UD6G.74 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.
You are bidding on this pulley. This pulley has a few rough spots as you can see in the photos but will run ok. Please click on the me icon above to see links to my webpage which shows all my John Deere and other manuals and other items.
This is a rather hard to find original cast iron pulley for a Fairbanks Morse Z hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It does have some pitting and some extra holes in the face of it but this won't affect it's performance.
This is a real nice original cast iron pulley for a hit and miss or throttle governed gas engine or other piece of machinery. It is in excellent condition with no cracks, breaks, or repairs of any kind. It measures 4 inches in diameter with a 4 1/2 inch face.
This is a rather hard to find original cast iron pulley for a Fuller and Johnson hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This is a real nice original cast iron pulley for an International Harvester Famous or Titan hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It is part number G1032 and measures 9 inches in diameter with a 6 inch face.
This is a rather hard to find original cast iron pulley for a hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This is a real nice original cast iron pulley for a York hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It measures 12 inches in diameter with a 5 inch face.
My photos are of the clutch disassembled & small pieces are all together on the counter top. The clutch is really simple with only eight parts.The pulley part #9 is on the chair. Then all the parts are assembled together.
This clutch pulley is made by Edgemont Machine Company, & is a bolt on style clutch pulley. The Pulley is 16 inches diameter. The bolt on plate is 12 & 3/8 diameter.
This is an extremely hard to find aftermarket flat belt pulley attachment for a Fordson tractor. It was made by the Plymouth Foundry in Plymouth, Wisconsin and is in great used condition with no cracks, breaks, or repairs of any kind. The pulley measures about 9 inches in diameter with a 6 1/2 inch face and turns as it should.
This is a rather hard to find original drive pulley for a Pickering or other make of governor. These governors were commonly used on steam engines and some larger gas engines and tractors. It is in excellent used condition with no cracks, breaks, or repairs of any kind.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
