208v to 240v transformer for sale, brand-new and used.

Nunome Electric Co. Dry-Type Transformer EN61558-2-4:19976.93 kVATYPE NETH 6930TVD00PRI. 208V/220V/240VSEC.

F10750-132 1 PH Transformer 750VA Input: 480-240V, 460-230-208V, 440-220-200V Output: 120-25V, 115-24V, 110-23V Please call us if you have any question at

Heaters with 1 1/4” npt Application Type CXC heaters are used primarily for water heating and have brass screwplugs and copper sheaths. Type CXF are used primarily for oil heating and have steel screwplugs. Low watt density heaters are used in heavier, non-circulated oils.

F10500-147 1 PH Transformer B 500VA Input:380-277-208V Output:120-240V Input: 380-277-208 V Output: 120-240 V Please call us if you have any question at

F10500-131 1 PH Transformer 500VA Input: 480-240V, 460-230-208V, 440-220-200V Output: 120-25V, 115-24V, 110-23V Please call us if you have any question at

Used Hatco C-27 Booster Water Heater Description: This item is great in conjunction with a commercial dishwasher in order to boost the final rinse temperature to the 180°F needed for sanitizing.

PM1914 Hytronics Corp ThyssenKrupp / Thyssen / Dover Model No. HV-3643 Three Phase Dry Type Transformer Primary: 208 / 230 / 240 / 460 / 480 V Secondary: 2500 VA WYE - 208V / 240V / 277V / 120V Each item is guaranteed to be fully operational and in great condition unless otherwise stated. Approximate Shipping Weight: 70.00 lbs Approximate Shipping Dimensions

AUBE RC840T-240 On/Off Switching Electric Heating Relay with Built-in 24 V Transformer This is the greatest thing since sliced bread! Put it in a circuit where you want to operate a line voltage (208v to 240v) resistance heater with a low voltage thermostat, and - voila - you have the 24v power for the thermostat and the relay switch to operate it. Plays nice with Wi-Fi and programmable thermostats, too!

This transformer for sale, is a low power transformer for the filaments of all the vacuum tubes used in the 551 oscope. The schematic is given in the picture of this listing. All of the secondaries in this unit are 6 VAC.

The Antek 1500VA isolation power toroidal transformers are commonly used for high end equipment such as audio amp and sensitive instrument. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. In addition, there are 2 accessory coils (high current) to add on either input or output coil to boost up output or increase input voltage.

Filament Transformer...Tested at full load for 1hr. output = 7.5v 51a input = 208v, weight = 20 lbs For use with 3cx25000x - 3cx3000x - 3cx6000a7 Perfect for 240v use, as you can reduce the input voltage via a variac or other means to a set up the filament voltage with precision. Removed from a broadcast transmitter.

Honeywell AT150A1007 Transformer, 120V/208V/240V with Universal Mount, Foot, Plate or Knockout

Used 75 VA 

 This is a used TRANSFORMER in perfect