227/2 for sale, brand-new and used.

The controls and suction valve installed on the pump are presently set-up for hydrostatic service. Pressure out of port "A" to the motor and return oil from the motor to port "B". The "B" port is used for braking.

2 HP runs on 208-230/460 3 phase. Max pressure is 2500 psi, flow calculated at 1.38 gpm Its a one way operation, power up gravity down. Orange table its on does not come with it.

End Suction Pump Manufacturer: Goulds Model: 3175 Size: 14x14-18H Material: SS Ft. Head: 69 GPM: 7600 RPM: 1180 Serial #: 227-B-958 Shipping Weight: 2,400 Lbs. If you have any questions please let me know.

End Suction Pump Manufacturer: Goulds Model: 3175 Size: 14x14-18 Material: SS Ft. Head: 68 GPM: 6500 RPM: 1180 Serial #: 227-B-957 Shipping Weight: 2,500 Lbs. If you have any questions please let me know.

ITEM:HUBBELL LED-2-EM-RWW 2-SIDED EXIT SIGN 120/227 VAC, 60HZ (NEW IN BOX)See pictures for details, what you see is what you get.

NEW Fireboy Fire Extinguisher MA2-500-227 Manual / Automatic Extinguishing Systems Automatic discharge at 175 degrees F( 79 C). The

North SSS Silver Shield / 4H Protective Sleeves

North Pancake Filter 75FFP100 N

North Organic Vapor Cartridge N75001 (pair) North Organic Vapor respirator cartridge.

North Gas and Vapor Cartridge 75SCP100 (pair) North Defender Multi-Purpose respirator cartridge for Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape), Hydro

International Buyers – Please Note: Import duties, taxes and

Kit No. 227 contains 18 Cratex Cones plus two No. 1341 Cone Mandrels.

Semi-automatic bandsaw HBS 230 DG Semi-Automatic Scissor Bandsaw High-quality European built &a

Nice looking machine. Made by Built Rite Manufacturing. New Dimension Power Roller Model MP 2.105 3" rollers, working width 25" 12 gauge Surface fpm 18 460 volt 3 phase.

Built by MZM Manufacturing in IL One button operation, closes, clamps, bends and opens. Runs on 80 psi and 110 volt, 5mp Here is the manufacturers web site http://mzmmfg.com/kzmzm4_008.htm The dies are 17" front to back and 23 1/2" side to side. You can use both sides at once or bend one side at a time.

This press was built by Spectrum Tool in Rochester NY for GM It came out of a fuel cell laboratory they shut down. It uses servo motors to drive the rams. The platen height is adjustable, the down height is 15" off the floor and up is 43" so it has 28" of stroke.

Kalamazoo Industries Abrasive Mitre Cut-off Saw ITEM DETAILS This is a Kalamazoo Abrasive Miter Saw with a 5 HP 3 phase motor. Pictures are of actual item, sold as is, not tested. Model KI14SS-3: 3 phase this has a 14" blade and table has 2 cam vises.