US $112.50
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | All Industrial |
Model | Our part# ALL-41096 |
Directions
Similar products from Fittings & Plates
Hardinge Model C24-D Back Plate Fixture Threaded Mount
8" Diameter Face Plate for a Metal Lathe Unknown Make & Model
8", 4 JAW CHUCK FOR A LABLOND LATHE, L0 BACK
TOMBSTONE; T-TYPE STEEL HORIZONTAL CNC FIXTURE
20 Pc Metric R8 Collet Set 3mm to 20mm High Precison for Bridgeport 20 Piece
Swing Bolts 3/8", 1/2", Latch Bolt & Cam handles 1/4" 20 8 Total pieces
Jacks, (3) Machinist / Toolmaker Set Up Swivel Screw Jacks, Working Condition
R8 Collet Rack with 12 slots for Bridgeport High Precision
8 Pc R8 Collet Set 1/8" to 1" for Bridgeport with R8 Collet Rack - 12 slot
Bison 7-875-064 Backplate Adapter for 3 & 6 Jaw Truchucks & Spindle Noses 6-1/4"
20 Pc R8 Collet Set 3mm to 20mm for Bridgeport with R8 Collet Rack - 48 slot
R8 Collet Rack with 48 slots for Bridgeport High Precision
R8 Collet Rack & Tool Tray with 15 slots for Bridgeport High Precision
16-3/4" DIAMETER GAP ENGINE LATHE PLATE 2-3/8" THICK
SHOP MADE ANGLE PLATE, HARDENED & GROUND
SUBURBAN SPI SINE SET COMPOUND SINE PLATE 6 X 6
5C SQUARE & HEX COLLET BLOCK FIXTURES w/ LEVER CLOSER & 4 HARDINGE COLLETS
Shopsmith 6" Face Plate, 505591
People who viewed this item also vieved
3.00 inches Welch super collet 5c
4.00 inches step chuck collet 5c
5" Welch super collet 5c. For Mill or lathe machine. Machinist tools
Wespo - Vlier - Kop-r-Klad Workholding Clamp - 4" Overall Height with Handle Up
1 PAIR 2" T-HANDLE CLAMPS KANT TWIST TYPE MACHINIST TOOL
Dead Center MT3 Metal Lathe Machinist Tool Atlas Southbend Craftsman Logan Morse
AMTAK MT2 LIVE BEARING CENTER FOR WOOD METAL LATHE CANADIAN MADE
NEW Steelex M1071 MT No.3 Bull Nose Center
34 - 1/2' threaded clamping studs
MACHINIST LATHE MILL MULTI POSTION 2 1/4" PANI VISE Machinist Vise Victor MFG
MINTY 185 lb. REED 4C MACHINIST MECHANICS BLACKSMITH SWIVEL BENCH VISE ANVIL
4" H/V Machine Vise For Holding Shafts And Round Pipe
PORTER CABLE QUICK CHANGE JIGSAW MODEL 9543-Brand New
Lathe chuck Independent jaw ~2-1/2" - 4 jaws 3/4 -16 Thread
JERGENS #30302 8-32 Delrin Tip Shortie Spring Plunger Made in USA
Vintage USA Made STARRETT No.191 Little Giant Jack screw set in original box
Taig tools 1220 Lathe Crosslide Milling attachment Z 3rd Axis
2 STEEL MACHINIST V BLOCKS 1-2 7/8"X1 3/4"X1 3/4"AND 1-1 3/4"X1 1/2"X1"CLEAN
Vintage Pair Brown and Sharpe No.749 V-Blocks No Clamps
8" Super Spacer 2 Notch Masking Plate Dividing Head Milling Machine Machinist To
BENCHMASTER ROTARY TABLE 1 DEGREE INCREMENTAL NO 3-4,USA milling machining
FIBROTAKT- STANDARD HYDRAULIC INDEXING TABLE MDL 11.13.8.13.5.5.7.1.1.4.0.1.2.0-
Lyndex-Nikken Lyndex 040-SPAN Spanner Wrench for ER40 Collet Chuck Nut
ETM SMITH COLLET HOLDER W/ 3/8 COLLET
NMTB 30 DA180 COLLET CHUCK STK 7736
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies