3 16 threaded rod for sale, brand-new and used.

UP TO 2 BIMBA 1" DOUBLE END AIR CYLINDERS FSD-041-M You are bidding on up to 2 Pneumatic Bimba Double Acting, Double End Magnetic Sensing Pancake Air Cylindesr with rear and front Threaded mounting holes, Model # FSD-041-M with 1 Inch of stroke, 3/4" Bore, and a 5/16" piston. Magnetic Sensing Body - 304 Stainless Steel Heads - Anodized Aluminum Alloy Piston Rod - Ground and Polished 303 Stainless Steel Piston Seals - Buna N Rod Bushing - Oil Impregnated Bronze Rod Seals - Buna N O-

ARO 2" STROKE STAINLESS AIR CYLINDERS 2418-5089-020 You are bidding on a Stainless Steel piston rod Double Acting Pneumatic Air Cylinders, No. 2418-5089-020 with 2 inches of stroke and a 1 1/8" bore, piston measures 3/8" diameter. Economair round cylinders are medium to heavy-duty units that can be installed anywhere that a repairable cylinder is desired.

NEW BIMBA 1" STROKE STAINLESS SPRING RETURN AIR CYLINDER 121.5-R This is a Fixed Auction for a Brand New Pneumatic Bimba Front Nose Mounting Spring Return Air Cylinder, Model # 121-R with 1 1/2 inches of stroke with a 7/16"(.437) piston threaded on the end. The "Original," with a "mirror finish" 304 stainless steel body, double-rolled end caps, sintered bronze rod bushing, Buna N "U" cup seals and the specially formulated HT-99 lubricant.

NEW PHD AIR PNEUMATIC CYLINDER 3" STROKE AP1X3-G-6K This is a Brand New Pneumatic PHD Bottom mount Tie-Rod Air Cylinder, Model AP1X3-G-6K. This cylinder has 3" Inches of Stroke and 1" Bore. Piston measures 5/16" and is threaded on one end.

(4) DUAL ROLLER ASSEMBLIES Overhead Conveyors & Rail Sliding Systems Used and in very good condition. Dual Roller Assemblies. Industrial grade.

Size M1.4x0.3. Body diameter 16 mm, length 22 mm. Comes with a small caliber.

* NOS ( New Old Stock )

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

FOR SALE: ONE SET OF TWO ALUMINUM 6061 MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.75" LONG, .750" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

FOR SALE: ONE SET OF TWO SOLID BRASS MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.875" LONG, .875" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

RARE SELF-CENTERING VISE/VICE TOOL (Type Mechanism in Hermes Vises / Engraving Vises / Scissor Lifts) SCISSORS LIFT MECHANISM PARTS, DIY New old stock (NOS), minor surface discoloration due to storage. Rare Solid Steel Self-Centering Vise Tool Mechanism Parts Set. This is the same general type of self-centering mechanisms found in the superior Hermes Vises, other Engraving Vises, and small Scissors Lift Platforms.

You are bidding on a Vintage Vise. This vise is embossed HOLLANDS - ERIE, PA. U.S.A.

May be used as a spindle-adapter for a wood lathe from LatheCity

May be used as a spindle-adapter for a wood lathe from LatheCity Morse Taper #3 two in one