C $31.00
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Accusize Industrial |
MPN | #1102-0034 |
Directions
Similar products from End Mills Router & Drill Bits
MICRO 100 1/2" 4 Flutes 6" Long- 4 1/2" NECK CARBIDE End Mill GLR-500-4
3 ASSORTED NIAGARA AND UNION SINGLE END HSS END MILLS - 5/8" 3/4" 13/16" DIA
(5) 1.00mm (.0394") 2 FLUTE CARBIDE ENDMILLS - NEW
New 3/8 carbide end mill 4 flutes
5 Pcs of 7/8"x3/4"x1-7/8"x4-1/8" HSS 4 Flute TiN Coated End Mill, #1400-3218x5
10Ps 3/16x3/8x1/2x2-3/8" M42 8% Cobalt 4 Fl End Mill, Center Cutting, #CO-316x10
5 Pcs of 1/2"x1/2"x1-1/4"x3-1/4" M42 HSS+8%Cobalt 4 Flute End Mill, #CO-12x5
PCT/GW 3/4" 4 FLUTE TiAIN Coated Carbide End Mill .187 Radius "BRAND NEW"
PCT/GW 5/8" 5 FLUTE TiAIN Coated Carbide End Mill,Ext. Neck "BRAND NEW"T41007504
3/4"x3/4x1-1/2"x4-1/8" 2 Flute Carbide Tipped End Mill for Aluminum, #0193-6483
Lot 5pcs Solid Carbide Coating TiAlN 2-Flute EndMill Dia 1.0mm Shank Dia 4mm
Lot 5 Flute Rougher End Mill Drill Bit Putnam/mhc/Onyx/OSG
NIAGARA 3/8,1/4,1/8,3/32 4 FL DOUBLE END AITiN End MillS "BRAND NEW" QTY 4
TTC 3/8" 3 Flutes TiCN HSS Rough End Mill "BRAND NEW" 08-193-060 QTY. 2
Niagara 1-1/4" A337 HSS 3 FL 6-1/2" Long SE TiCN End Mill "BRAND NEW" EDP#33919
1/8" 4 FLUTE 90 DEGREE POINT ANGLE CARBIDE DRILL MILL
IMCO 1/2" 4 FLUTES CARBIDE 4" Long-Single End-END MILL "BRAND NEW" PN:97332
12" 4 Flutes CARBIDE End Mil Double Endl "BRAND NEW" MADE IN USA
Niagara 1/2" 4 FL Carbide C430 SINGLE End 4" Long TiALN Ball End Mill EDP# 53996
TTC 1-1/4" 3 Flutes 6-1/2" Long HSS Rough End Mill "BRAND NEW" 08-193-140
People who viewed this item also vieved
NEW WORLD PRODUCTS WNMG331-PC MK2 (C2 UNCOATED) TURNING CARBIDE INSERTS 10PCS
NEW WORLD PRODUCTS TNMG332-PD MK2 (C2 UNCOATED) TURNING CARBIDE INSERTS 10PCS
High Speed Steel End Mills Cutters
Vintage Wiss Sheet Metal Cutters Shears Lot of 9
(#5067) New Machinist USA Made .439 Inch Chucking Reamer
(#5062) New Machinist USA Made 25/64 Chucking Reamer
Antique Cast Iron Wesley Mfg. Check Punch 1890
LOT OF 13 HSS METRIC & STANDARD DIES 4 -40 NC TO M10X1.25 WITH 1" WRENCH WINTER
NIAGARA 5" X 1/32" X 1" CONCAVE SLITTING SAW 44 TEETH
GLOBUS 4" X 3/32" X 1" SLITTING SAW WITH SIDE CHIP CLEARANCE 36 TEETH
SUMITOMO Cermet Turning Inserts VNGG330ESU T2000Z Qty 10 [2066]
NTK SRG 423 Ceramic inserts 10 pac
2x SCS10UU Size 10mm Linear Motion Ball Bearing Slide Bushing HPP
2x SC12UU SCS12UU 12mm Linear Motion Ball Bearing Slide Bushing Size 12mm HPP
PAIR OF DUMONT METRIC B BROACHES 4MM & 5MM + ASSORTED BUSHINGS & SHIMS
DUMONT 12MM METRIC D BROACH + ASSORTED SHIMS
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies