US $70
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Primary Application(s) | Face Milling, Finish Profiling, Speciality Cutting |
| Brand | Niagara Cutter | ||
| Material | Cobalt | ||
| Model | EDP#N89901 | ||
| Coating | AlTiN/TiAIN | ||
| Flutes | 4-Flute | ||
| End Type | Double End | ||
| Quantity | 4 |
Directions
Similar products from End Mills Router & Drill Bits
New 3/8 carbide end mill 4 flutes
5 Pcs of 7/8"x3/4"x1-7/8"x4-1/8" HSS 4 Flute TiN Coated End Mill, #1400-3218x5
10Ps 3/16x3/8x1/2x2-3/8" M42 8% Cobalt 4 Fl End Mill, Center Cutting, #CO-316x10
5 Pcs of 1/2"x1/2"x1-1/4"x3-1/4" M42 HSS+8%Cobalt 4 Flute End Mill, #CO-12x5
PCT/GW 3/4" 4 FLUTE TiAIN Coated Carbide End Mill .187 Radius "BRAND NEW"
PCT/GW 5/8" 5 FLUTE TiAIN Coated Carbide End Mill,Ext. Neck "BRAND NEW"T41007504
3/4"x3/4x1-1/2"x4-1/8" 2 Flute Carbide Tipped End Mill for Aluminum, #0193-6483
3/4" 4 Flute M42 8% Cobalt TiAlN Roughing End Mill, Standard Tooth, #1102-0034
Lot 5pcs Solid Carbide Coating TiAlN 2-Flute EndMill Dia 1.0mm Shank Dia 4mm
Lot 5 Flute Rougher End Mill Drill Bit Putnam/mhc/Onyx/OSG
TTC 3/8" 3 Flutes TiCN HSS Rough End Mill "BRAND NEW" 08-193-060 QTY. 2
Niagara 1-1/4" A337 HSS 3 FL 6-1/2" Long SE TiCN End Mill "BRAND NEW" EDP#33919
1/8" 4 FLUTE 90 DEGREE POINT ANGLE CARBIDE DRILL MILL
IMCO 1/2" 4 FLUTES CARBIDE 4" Long-Single End-END MILL "BRAND NEW" PN:97332
12" 4 Flutes CARBIDE End Mil Double Endl "BRAND NEW" MADE IN USA
Niagara 1/2" 4 FL Carbide C430 SINGLE End 4" Long TiALN Ball End Mill EDP# 53996
TTC 1-1/4" 3 Flutes 6-1/2" Long HSS Rough End Mill "BRAND NEW" 08-193-140
3/32" 4FL DOUBLE END STUB LENGTH CARBIDE END MILL
NIAGARA 1/2" 4 FL DOUBLE END AITiN End Mill "BRAND NEW" EDP# N89901
SGS 3/32" 4 FLUTE Double End TiAIN Carbide End Mill "BRAND NEW" 39609 Qty 2
People who viewed this item also vieved
NEW WORLD PRODUCTS WNMG333-PC MK2 (C2 UNCOATED) TURNING CARBIDE INSERTS 10PCS
SANDVIK 490R-08T308E-MM 1040 Insert
Vintage Wiss Sheet Metal Cutters Shears Lot of 9
Lot of (10) Noga EO1000 Disposible Deburring Tool Edge Off New
(#5062) New Machinist USA Made 25/64 Chucking Reamer
(#5066) New Machinist USA Made .3960 Inch Chucking Reamer
LOT OF 13 HSS METRIC & STANDARD DIES 4 -40 NC TO M10X1.25 WITH 1" WRENCH WINTER
VINTAGE,Marked NO. OX METAL PUNCH,PAT JAN.21,19 / Parker Kalon Corp.,N.Y.,U.S.A.
GLOBUS 4" X 3/32" X 1" SLITTING SAW WITH SIDE CHIP CLEARANCE 36 TEETH
CLEVELAND 4"x1/8"x1" STRAIGHT SIDE TOOTH SLITTING SAW 36TEETH
NTK SRG 423 Ceramic inserts 10 pac
Kaiser 10.938.837 TP071205CBN Cubic Boron Nitride Boring Insert
2x SC12UU SCS12UU 12mm Linear Motion Ball Bearing Slide Bushing Size 12mm HPP
1x SC16UU SCS16UU Size 16mm Linear Motion Ball Bearing Slide Bushing HPP
DUMONT 12MM METRIC D BROACH + ASSORTED SHIMS
DUMONT 14MM METRIC D BROACH + ASSORTED SHIMS & 42MM BUSHING
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies