3 8 router bit for sale, brand-new and used.

Brand new, never used 3/8" round-over bit with 1/2" shank. Fits all 1/2" shank portable and table routers. C2 Micrograin tungsten carbide cutting edge provides a good balance of strength and durability.

This is a brand new, never used 3/8" cutting diameter flush trim straight router bit with a 3/8 inch bearing and two carbide flutes. Flush cut bits are used primarily for flush cutting edges to a template, guide or jig. The bearing at the end is of the same diameter as that of the cutting depth so that the cutters will clear all material outside any template the bearing rolls along.

This is a brand new, never used 3/8" cutting diameter flush trim straight router bit with a 3/8 inch bearing and three carbide flutes or blades for superior smoothness, speed, and consistency of cut. Flush cut bits are used primarily for flush cutting edges to a template, guide or jig. The bearing at the end is of the same diameter as that of the cutting depth so that the cutters will clear all material outside any template the bearing rolls along.

This is a brand new, never used 1/2" cutting diameter straight router bit with two carbide flutes (blades) and a special gullet between cutting edges that allows for material clearing in mortising applications. The geometry of the blades and the open space between them is designed to allow for clean edge and clear bottom mortising up to about 3/8" depth for shallow hinges.

This is a brand new, never used 3/8" cutting diameter straight router bit with two carbide flutes or blades. Straight bits are used primarily for clearing dado channels for woodworking joinery, or, in conjunction with a router plate guide bushing or an added shank bearing, for flush cutting edges to a template. This bit fits all 1/2" shank portable and table routers.

This is a brand new, never used 5/8" cutting diameter straight router bit with three carbide flutes or blades for superior smoothness, speed, and consistency of cut. Straight bits are used primarily for clearing dado channels for woodworking joinery, or, in conjunction with a router plate guide bushing or an added shank bearing, for flush cutting slab edges to a template. This bit fits all 1/2" shank portable and table routers.

Brand new, never used 10 degree dovetail router bit with 3/8" cutting diameter at the widest point, carbide edges and 1/2" shank. These bits are used for woodworking joinery along with a jig, or guide. The tapered dovetail shape makes alternating passes through one panel and opposite passes through another allowing for both straight end to end joining as well as right angle joints.

Hello and thank you for looking at my item(s)... For sale is a 3/8 in. Rabbit cut router bit.

Remind: FREE SHIP to buyers in United States. These 5 pieces router bit is 5/8"-11 thread arbor.If your grinder / polisher spindle is M14 Thread, no worry. Please just let us know when you pay, then we will attach 1 piece of 5/8 to M14 thread converter nut as FREE GIFT to you.

FREE SHIP (United States): Remind: If your polisher / grinder is M14 Thread, no worry.

New 3/8 inch Radius Brazed Diamond Router Bit 1/2" ShankFor routing stone with wood router40/50 grit diamond, best on marble, granite and glass3/8" for creating small round over edge of granite or marble slabs.Diameter: 1-1/3"1/2" Shank, 1-1/3" length, to be used on conventional wood rou

Quality products at affordable prices. Check out our

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

KENT BLADES FROM KENT SUPPLIES PAYMENT We accept PAYPAL and most major credit cards via Paypal. It is NOT