3 inch wheel for sale, brand-new and used.

4" x 2" Steel Wheel Caster - Rigid (2 EA), Swivel (2 EA) 40 Series Medium Heavy Duty Casters Features

This trio of used rubber wheel swivel casters have the same 5 by 4 inch slotted face plate. The trio have 6 inch hard rubber wheels, have the same grease fitting on the swivel and have axle grease fittings. However, the center wheel has an axle grease fitting in the axle end while the other two have fittings on the wheel.

4" x 2" Polyurethan on Plastic Caster - Rigid (2 EA), Swivel (2 EA) 40 Series Medium Heavy Duty Casters Features

Set of 4 plastic wheel casters with brackets. The wheels are plastic and measure roughly 3 inches wide. They are 1/2 inch think.

Heavy duty casters in close to new condition. It seems that they have 1 3/4" by 2 7/8" bolt pattern-please see pictures. 5" wheel by 2" wide.  Two casters are swivel with brake, two stationary.

You are bitting on a set of 3 (three) Swivel Plate Caster Wheels. They are Brand New, never used. Read Specification below before Ordering.

The Lotoons Store NEW Shepherd 9484 4-Inch Rigid General Duty Soft Rubber Wheel Caster

2 Ton Hoist Precision-cast aluminum alloy ratchet wheel; one piece construction galvanized, aircraft quality cable. Interlocking, precision fit, steel alloy pawls with safety spacer sleeve. Cold rolled, high strength, tempered steel frame and handle drop-forged steel slip hooks with O

Long Handle Hoisting Wheel Steel construction and all metal cast wheel with bearings Use on ladder to hoist material or supplies to roof top. uses 3/4 or 1" manila or sisal This is a professional grade quality item and we sell to roofing wholesalers all over USA.. please see our store for many other roofing tools and other hoisting wheels Ladder not included...

Material Handling Equipment: Box Dumpers, Yard Ramps, Dock Lifts, Docks Seals and Shelters, Dock Levelers, Forklift Ramps, Gantry Cranes, Jib Cranes, Lift Tables!

Imperial Brass No. 123-F FLARING TOOL KIT with TUBING CUTTER for use on 3/16, 1/4, 5/16, 3/8, 1/2, 5/8 inch tubing. Tools are clean in very good working condition no wear, damage or abuse.

general Rodrunner Sewer and Drain Cleaning Machine w/220 FT 1-1/4 cable 22 pc. THIS UNIT DOSE NOT COME WITH ANY CUTTERS YOU CAN BUY AT ANY DEALER IN THE USA BUT I DO NOT HAVE ANY OHIO RESIDENTS OR PICKUPS IN OHIO ARE REQUIRED TO PAY 7.25% TAX UNLESS TAX EXEMPTION DOCUMENTS ARE PROVIDED Today I am selling a General RodRunner Sewer Cleaning Machine with 1-1/4" Cables I tested the machine and It spins the cable fordward and Reverse. The machine has a 3/4 hp motor .

1 wheel from a carton of 12 wheels, the carton and label will not be included. The part # is not marked on the wheels, only on the carton. Osborn 4" x 3/8" Arbor Hole x .014 Heavy Duty Knot Wire Wheels.

For sale is a WEILER ROUGHNECK wire brush wheel, model 3A201A that is new and unused in its original box. The manufacturer description is... "WEILER 09000 Stringer Bead Knot Wheel Brush Diameter 6 7/8 Inches Wire Size 0.020 Inch Maximum Speed 9000 RPM Arbor Hole 5/8-11 UNC Inches Trim Length 1 1/8 Inches 56 Knots" I bought more than I need for myself so I can offer them to you at an excellent discounted price as compared to what I see them selling for elsewhere online.

Anderson Brush 03003 Dm3 .0118 Crimped Wire Wheel New, Picture shows 5 this listing is for One (1). Some of these have small amount of surface rust on face plate, does not effect performance. MANUFACTURER SPECS: Wire Material: Carbon Steel Diameter: 3 inch Wire Size: 0.0118 in.

Enkay 1860-3C 3-Piece Wire Wheel Set 1/4-inch Shank Includes: 2-inch Coarse Cup brush, 2-inch Course Wire wheel, 3-inch Cou

I have used these abrasive wheels to leave an attractive 80 Grit brushed finish on metal tools, instruments etc. Long 2-5/8 " long bristles work around workpiece features. List Price $68.43 I have arbor adapters listed on eBay for use on 1/2", 5/8", 3/4", 1", and 1-1/4" Diameter arbors.

Norton 66243528629 - 3" X.03 5X 3/8 23A601QBNA2 CUTOFF WHEEL - Pack of 25 - Abrasives - Wheel Diameter (Inch): 3; Wheel Thickness (Decimal Inch): 0.035; Hole Size (Inch): 3/8; Abrasive Material: Aluminum Oxide; Reinforced (Yes/No): Yes; Bond Type: Resinoid

Manufacturer: Norton Norton Item Number: 4NZ24-TB65B 4NZ24-TB65B, Grinding Wheel, Type Straight, Type Number 01, Diameter 30 Inch, Thickness 1/4 Inch, Arbor Size 1-3/4 Inch, Bond Type Resin B65B, Grit Size 24, Grader T, Abrasive Material Zirconia Alumina Norton® Cut Off Wheel of 20" Dia is ideal for gate/riser removal and cutting of forgings in foundry/forge shops. Type 1 wheel of 5/32" thickness is able to rotate at 2710 RPM using 1" arbors for delivering high performance.