3 position key switch for sale, brand-new and used.

Key Lock on off Switch Red Mushroom Push Button Station

- 1 NEC 4000 - 1 Tower PC with NEC Software and license Up to 5 monitor screen.

var itemNumber = window.ebayItemID ?

This is for ONE 4 Position Replacement Ignition Switch with Key, PreHeat-Off- Run- Start The first photo is NOT the exact switch you will receive, it is a stock photo. It is the smae type but look at the other photos to see the exact look of the piece you will receive This switch will include the key and the end is a 6 blade electrical connection that measures 1 1/4" x 3/8 with a raised area t the top for the locking clip.

This is for ONE 3 Position Replacement Ignition Switch with Key, PreHeat-Off- Run- Start This switch will include the key and the end is a 5 blade electrical connection that measures 1 1/4" x 5/8 with a raised area at the top for the locking clip.

*PRICE REDUCED! MOTIVATED SELLER!*This ETC ELTS2 Emergency Lighting Transfer System was purchased for a project to be used at the Walt Disney World Resort which never was implemented. It has been stored in its box since then and is available to you now.

3 pcs 2NO-2NC ON/OFF Lock Switch Key Ignition Switch KS28 Quantity: 3 Pcs Condition: Brand New Spec: - With a metal nut and two keys, 2NO-2NC - Rating: 250V/2A or 125V/4A - The key can be taken out when the switch stays at ON or OFF position - Screw hole diameter about 18.50mm, Total length about 37mm Part. No.: KS-28. International Buyers – Please Note: a) Import duties, taxes and charges are not included in the item price or shipping charges.

Brand New Oslo K1 Series Key Switch K1-101S1S1N1 2 position0C01 key code

DescriptionThe PS-DATK and PS-SATK manualpull stations feature high-quality,die cast metal construction. Theyare available in either single or dualaction configurations with SPSTswitch, and terminal strip connections.The normally open contact,which closes when the pull stationis activated, is rated for 1 amp, at125 VAC or 30 VDC.

Off-Ignition-Ignition/Start 3 position keyed ColeHersee Switch 25 amps ignition, 70 amps start 12volt A switch similar was used on old WHEEL HORSE tractors for the start and run.

THIS ITEM IS FOR 1 (ONE): KEY SWITCH MADE BY: A-H & H (Arrow-Hart) SPST (single pole - single throw) ON - OFF KEY can be removed in OFF position ONLY. RATED: 6 AMPS 125V, 3 AMPS 250V U.L. & CSA LISTED MADE IN U.S.A.

1pc 18x16mm High Quality A Series 2803 2NO&2NC ON/OFF Key Ignition Lock Switch