3 pulley for sale, brand-new and used.

This is a rather hard to find original cast iron pulley for a hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.

This is a rather hard to find original drive pulley for a Pickering or other make of governor. These governors were commonly used on steam engines and some larger gas engines and tractors. It is in excellent used condition with no cracks, breaks, or repairs of any kind.

Up for sale is the factory clutch pulley for the IHC LA and LB engines. Fits both the 1 1/2- 2 1/2hp and 3-5hp engines. 10" in diameter.

UP FOR BIDS ONE CLUTCH PULLEY FOR A FAIRBANKS MORSE THROTTLE GOVERNED 3 HP Z ENGINE. No cracks/welds/braze that I can see. Very nice unmolested Fairbanks Morse Clutch Pulley for your 3 HP Z Engine.

Here is a nice 5" diameter clutch pulley. I have never seen another clutch exactly like and as small as it is. I think it is in great shape and ready to use.

Here is an original clutch pulley that fits a 2-1/2hp to 12hp Hercules, Economy, or Jeager. It needs a little cleaning and such but it will make a nice pulley. The handle is loose, it spins and moves in and out but the pulley is stuck.

Here is a factory original clutch pulley for a 3hp Fairbanks Morse Z engine. This pulley bolts to the flywheel but has to slip over a crankshaft to work properly . The hole for the crankshaft is about 1-13/16" which should be standard for a 3hp FM Z.

Here is an original belt pulley that fits a 2-1/2hp to 12hp Hercules, Economy, or Jeager. There are NO cracks, breaks, or welds. Check out the pictures and see if you need it.

Pulley 189 usd Weight: 4.5 kg Diameter pulley 285 mm Delivery: 35-45- days (ships out within 3 days)- Worldwide International

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1934228&itembgcolor=0xf4f1e2&bordercolor=0x000006&storewindowbgcolor=0xbbe1e6&toptextcolor=0xf4f1e2&bottomtextcolor=0xf4f1e2&stripcolor=0x051e69&auctionclosemessagecolor=0x051e69&emptyboxmessagecolor=0x051e69&buttovercolor=0x051e69&buttoutcolor=0x051e69&searchtitlecolor=0xf4f1e2&searchbuttbgcolor=0xf4f1e2&searchbuttt

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1934228&itembgcolor=0xf4f1e2&bordercolor=0x000006&storewindowbgcolor=0xbbe1e6&toptextcolor=0xf4f1e2&bottomtextcolor=0xf4f1e2&stripcolor=0x051e69&auctionclosemessagecolor=0x051e69&emptyboxmessagecolor=0x051e69&buttovercolor=0x051e69&buttoutcolor=0x051e69&searchtitlecolor=0xf4f1e2&searchbuttbgcolor=0xf4f1e2&searchbuttt

I am selling a used Reliance Duty Master motor with variable speed pulley as shown in the 4 pictures and described.   All items I sell are warranted for 60 days unless otherwise marked.   Overnight shipping is available for most items.

This is a 4x6 metal cutting bandsaw for parts, it is not currently working. The motor runs and the pivot, table, vise, etc. are all working.

Up for sale is a Fairbanks Morse ZD, Type Z Style D, Hit&Miss ZD Throttle Governed Engine, Please read discription and Look at all Pictures as they are a part of the discription. 1944 Fairbanks Morse ZD Type Z Style D Engine is mounted on wood skids and on a Two Man Solid Oak Handtruck, the two wheel cart in pics. is not included, S.N.

I'm selling this Coil wire / Winder machine. I don't know about this machine because my Dad was the owner and he

TS550 motor produces almost no noise, saves energy (60-80%) and is brushless, speed djustable and durable. It provides a high starting torque even at low speed or from a complete stop. By using a modern technologically advanced microprocessor,Hall sensor and Pulse-Width Modulation technology,the motor can be set to rotate at different maximum speeds, in either normal or reverse directions, and can start with different accelerating speeds.

Industrial Equipment Expert, LLC

Back by Popular Demand WW-650 Spindle. By: Wolfgang Engineering.

Industrial Equipment Expert, LLC