3 way hydraulic valve for sale, brand-new and used.

CT-300AL Refrigeration Hydraulic Expanding Tool Kit with Tube Cutter Six Easy steps: 1.Deburr inside of tube. 2.Anneal the tube if necessary(for hard or thickwall tube). 3.Screw the expander head on expander.

Very good condition Pump with Honda GX100 engine. AMKUS GH2A-MC 10,500 psi    SHIP TO 48 STATES  Gasoline powered 4 cycle Honda® engine Uses lead free gasoline High pressure, 2-stage pumping system stage 1 = .8 gpm, stage 2 = .14 gpm 4-way, 3-position selector valve .68 gallon reservoir .66 usable Two tools can be connected simultaneously Alternate tool operation Non-toxic mineral based hydraulic fluid Includes spark arresting muffler Easy access drain port to drain hydraulic fluid from pump

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos

Hydraulic solenoid valve D03 footprint. 5000 psi working pressure. 15 gpm maximum flow rate.

Enerpac P-202 Hydraulic Lightweight Hand Pump, Two-Speed Description Hydraulic Cylinders, Jacks, Lifting Products and Systems Enerpac provides the largest selection of cylinders and lifting systems, fully supported and available through the most extensive network of distributors worldwide. We have a solution for virtually any application – lifting, pushing, pulling, bending or holding – in most industrial and commercial work environments.

Two spool hydraulic 4 way, 3 position directional control valve, lever actuated. One tandem spool ( pressure open to tank with ports A & B blocked in the center position) and one motor or float spool (ports A & B open to tank with pressure blocked in the center position). Can be used in a circuit with one double acting cylinder and one hydraulic motor.

Best offer! We are happy to consider all reasonable offers! These are the actual pictures of the unit.

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated, tandem center (pressure open to tank with ports A & B blocked in the center position). Tandem center spools are primarily used with double acting cylinders. Spring centered (spool will return to neutral when lever is released).

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated. Two tandem spools ( pressure open to tank with ports A & B blocked in the center position) and one motor or float spool (ports A & B open to tank with pressure blocked in the center position). Can be used in a circuit with two double acting cylinders and one hydraulic motor.

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated, tandem center (pressure open to tank with ports A & B blocked in the center postion). Tandem center spools are primarily used with double acting cylinders. Detent centered (spool will remain in position until manually shifted).

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated. Two tandem spools ( pressure open to tank with ports A & B blocked in the center position) and one motor or float spool (ports A & B open to tank with pressure blocked in the center position). Can be used in a circuit with one double acting cylinder and one hydraulic motor.

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated. Two tandem spools ( pressure open to tank with ports A & B blocked in the center position) and one motor or float spool (ports A & B open to tank with pressure blocked in the center position). Can be used in a circuit with two double acting cylinders and one hydraulic motor.

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated, tandem center (pressure open to tank with ports A & B blocked in the center postion). Tandem center spools are primarily used with double acting cylinders. Spring centered (spool will return to neutral when lever is released).

This Enerpac XC1202M cordless hydraulic pump powers Enerpac hydraulic tools (sold separately) in areas with limited access to a power source and where a power cord would create a tripping hazard. The 1/2 hp motor is powered by an Enerpac XC-28V lithium-ion battery (sold separately) for extended use. The battery requires an Enerpac XC-115VC or XC-230VC battery charger (sold separately).

THIS LISTING IS FOR A USED ENERPAC PUJ-1201B 10000 PSI ELECTRIC HYDRAULIC PUMP TESTED Hydraulic Electric Pump, High Force, Reservoir Capacity (Cu.-In.) 231, Reservoir Capacity (Gal.) 1, Oil Displacement @ 100 PSI 200 cu. in./min., Oil Displacement @ 700 PSI 70 cu. in./min., Oil Displacement @ 10, 000 PSI 20 cu.

This sale is for ONE GROUP of THREE previously owned COPIES (original not a photocopy) of: 1) Applied Power Inc., E-309 ENERPAC CATALOG 1977 EDITION, (Butler 1977) 83 pages bound in a slightly dirty soft cover with three holes punched near the spine. This catalog provides image and offers descriptions and some specifications for: cylinders, pumps, pump and cylinder sets, hoses and valves, hydraulic gages, power clamps, hydraulic presses and maintenance jaws.

Fluke 700HTP-2 Hydraulic Test Pump, 10000 psi/690 Bar Product Features Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke Integral pressure adjustment vernier knob for fine pressure adjustment Improved stroke limiting mechanism Directly connection to pressure modules consolidates two separate pieces into one when perf