3/4 nipple for sale, brand-new and used.

This Is an Exact Replica Cone Style Muffler For the 1 1/2 1 3/4 & 2 Hp Economy, Jaeger, & Arco Hit & Miss Or Throttle Governed Gas Engines Using A 1" Pipe Thread For the Exhaust, I have seen this muffler Used on the later XI & XK, JI & JK Economy Engines. This is 6" In Dia ..... 3 " tall 1 " Pipe thread......

This listing is for a set of 4 new Shepherd Hut Wheels (24" diameter) in cast iron. Traditional heavy-duty design - unpainted. Dimensions:Diameter: 610mm (24")Rim Width: 82mmHub Width: 117mmAxle Dia: 37.5mmWeight: 37kilos each These wheels are cast from our own Pattern in an English Foundry (Not Foreign Made!) and include a grease chamber in the hub.

Here is a muffler from a vintage gasoline engine. This collectible gas engine muffler measures about 4-1/2" around and 3" wide with a 1" male pipe thread nipple attached. Looks to be in good condition with only surface rust and some small dents though at some point there has been a 1" x 3/4" bell reducer added.

Here is a muffler from a vintage gasoline engine. This collectible gas engine muffler measures about 4" around and is about 3" thick with a 1" male pipe thread nipple attached that is about 4-1/2" long. Looks to be in good solid condition with only surface rust and some pipe wrench marks.

This is a New REPRODUCTION Muffler for a Briggs & Stratton Gas Engine. 4 inch Ball type 5 inches long with 3/4 inch pipe threads. Nipple part is 2 1/4 inches long.

ADAPTER 1 1/16-12 UN X 3/4-16 UNF Notice: Your engine model may require this adapter due to a recessed oil drain port or other obstruction. Adapter for 1 1/16-12 UN male thread to 3/4-16 UNF female thread for T-204 valve. Fumoto Adapters are constructed of 100% brass and designed to add extra length to the Engine Oil Drain Valve to allow installation when a recessed drain port location or other obstruction prevents fully tightening the valve.

BRAND NEW ROYAL ENFIELD REAR WHEEL COMPLETE SPOKES AND NIPPLE KIT Special Offer for all Royal Enfield Enthusiasts and Owners...Save Money...Order Now To rebuild the Complete Front Wheel you would be replacing Part 141135 (20 Inner Spokes), 141136 (20 Outer Spokes) and

This kit was used once, and is in like new condition. The case is a little damaged, the sleeve that hold the hose in the lid is broken. But the equipment is like new.

Here comes the fun There are times when one wants the best espresso extraction without hesitating to what is involved to install a quality espresso machine and without hesitating to learn the skills needed to make it happen. Are you ready? Well, after setting up this machine, and by using the appropriate commercial grade grinder, it will take you approxamately around 77 extractions by playing with your differnt grind of espresso ground as well as your manual skills in regards the lever.

$(document).ready(function(){ $("#testimonials > li:gt(0)").hide()

10 (ten) Beer line Tailpiece fittings BRAND NEW! High-Quality,

NEW Low Profile US Sankey Keg Coupler - D System

Shank Features:4 1/2" Long 3/16" BoreChrome PlatedBrass Construction

4 Way Co2 Air Gas Distribution Manifold Splitter Draft Beer Kegerator 3/8 Barb

2 Way Co2 Air Gas Distribution Manifold Splitter Draft Beer Kegerator 3/8 Barb

Regulator Draft Beer 3/8" Hose Barb Specifications: Threads Right Hand 1/4" NPT (National Pipe Thread) Barb 3/8" O.D.

I sell a kit called the Complement, that allows you to counter pressure bottle fill direct from your kegerator or keezer tap. This kit pairs up with an insertion bottler for Perlick 525SS and 575SS faucets, such as the defunct but effective Bowie Bottler, or the Ontario Bottler sold here on eBay under item number 320896717175 by a classy fellow from Ontario, Canada.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!