3/8 bushings for sale, brand-new and used.

1/4, 5/16 and 3/8 inch broaches. these are either Dumont or Hassy Savage (see photo). Included are 6 bushings (no shims).

Martin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13" Bore, 2.187" OD, 1.37" Length

Features Jaw teeth and guides are hardened and fully ground on both sides. Pinions are hardened and ground. Scroll plate is drop-forged of fine alloy steel hardened and ground.

Features Jaw teeth and guides are hardened and fully ground on both sides. Pinions are hardened and ground. Scroll plate is drop-forged of fine alloy steel hardened and ground.

Features Jaw teeth and guides are hardened and fully ground on both sides. Pinions are hardened and ground. Scroll plate is drop-forged of fine alloy steel hardened and ground.

Here is a nice used Sullair MDT-30 demolition tool. Works quite nicely. No bit included.

What's included: 5 bushings - 3/8" ID x 5/8" OD x 3/4" Length I have 539 of these bushings so if you would like a larger or specific quantity just email me and I will make you a good deal...

What's included: 5 bushings - 0.377" (V) 3/8" ID x 5/8" OD x 3/4" Length Drill Bushings

Greenlee (bushings for metal stud punches)

This is for 7 unused bushings 

Features Jaw teeth and guides are hardened and fully ground on both sides. Pinions are hardened and ground. Scroll plate is drop-forged of fine alloy steel, hardened and ground.

robotics,machine control products, machine controls, sensors, PLC and HMI

CNC Type LB Toolholder Bushings 2pcs, 1” ID x 2” OD, Used: These toolholder bushings are in good condition. They measure 4-1/4” long with a 2” solid 3-5/8” body that features 4 clearance holes. This allows you to clamp directly onto the cutting tool by using set screws.