368 8 for sale, brand-new and used.

Item is an Enco Indicator Stand/Base with working magnet and gage.Stands 9 1/2 Inches High.Bar is 7 Inches.Gage is Federal C81Q, 001 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 10

For Sale: Magnetic Base Indicator Stand. Stand has a strong magnetic pull with an on/off switch for the magnet. However the magnet will not turn off, nor will switch move into the off position Stand post measures 6 5/8" long Feel free to contact us by phone or email with any questions or concerns.

For Sale: Magnetic Base Indicator Stand. Stand has a strong magnetic pull and has a functioning on off switch for the magnet Stand post measures 7" long Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a

Empty Box only Mitutoyo 368-265 Holtest Vernier Inside Micrometer 0.65-0.8" - EMPTY BOX ONLYFoam in boxExcellent Condition

Precision Machinist Block Bender Die with Dovetail. HR12 1 3/4"tall 1 1/4"wide dovetail is1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in!

For Sale: 2 items sold as a group a 6 1/8" machinist straight edge block and a 7" electrical wire attachment runner board with 15 different attachment locations. Both of these are in great condition and will serve their purpose well Feel free to contact us by phone or email with any questions or concerns. Don't

Used unmarked drill chuck. Chuck has a 3/8" cap. Please take a close look at all of the photos.

Used Jacobs No 6A drill chuck with No 2 Morse taper. Chuck has a 0 - 1/2" cap and 33 taper. Jacobs chuck arbor part No A0233.

Used Jacobs drill chuck, model number 3B. 1/8" - 5/8" cap with a 5/8"-16 THD. Please take a close look at all of the photos.

Jacobs Number 500 Portomatic Keyless Drill Chuck. 1/16" - 1/2" cap. With Jacobs chuck arbor, part number A0306.

Used H O Lee Knockout Keyless Drill Chuck. 7/8'' Cap. Arbor marked with A493.

Used Validus Keyless Drill Chuck. 1/8'' - 5/8'' or 3-16mm cap. No 2 Morse Taper, No 6 Chuck Taper.

Used K O Lee Knockout 1/2" Drill Chuck, model number A470G, with arbor, model number a482. Used but in good condition with some minor wear. Please look closely at all the photos.

Used Jacobs No 375 portomatic keyless drill chuck. 0 - 3/8" cap, with unmarked taper. Please take a close look at all of the photos.

Uses Metabo-Futuro keyless drill chuck. 1/8" - 5/8" cap. Please take a close look at all of the photos.

Keyless drill chuck, in great condition. 0 - 1/2" cap. Made in Italy but no brand marking.

Reed CS-40 knurling tool wheels. Outer diameter is 1/2" and inner diameter is 3/16". Wheels are 3/16" thick.

1543F8G.46 Some Kind of New Quick Release / Connect Chucks, or Tool Holders, or Couplers, or ?, Part Number Unknown. Each bid quantity is for One (1) Set including Chuck, Spindle, and Little Wrench that Doesn't Fit Anything. You may bid / buy any number, up to the total quantity available above.

Fort Sale: Unique machinist set up V block measures 6" x 4" x 3 1/8" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in!