4 inch carbon steel pipe for sale, brand-new and used.

Hi, This is a High Quality Barnes 3/8-18 NPT, High Speed Steel Oxide Coated Pipe Tap, # 20652. These are not cheap Carbon Steel taps which gall or rip the material. The Oxide finish is excellent for cutting all materials.

Thread size: .125 inch Threads per inch: 27 Thread standard: NPT Number of flutes: Four (4) Cutting direction: Right Style: Taper Applicable materials: Most metals Material: High carbon steel

Made by PHD Manufacturing Pipe Size...1/2 inch Rod Size...3/8 inch Cross Bolt....1/4 inch Maximum Load...730 lbs Weight each... .24 lbs Check out my other items!

New box of 3/4 inch threaded unions, made by Penn Machine. High quality, U.S. manufacturer, A105 Carbon Steel.

Tekton 8-Piece Ratchet Pipe Threader Kit 7574 Pipe Reversible Drive Die Wrench This kit was originally sold as a 9 piece set - (they count the case as one of the pieces) This auction is for an 8 piece set (no case)....the tools you see are the actual tools you will get The case for these is damaged, and these weigh so much that it does not make sense to charge an additional $20 for a damaged case.....

LOT 7 PIPE TAPS VERMONT 1 1/2 GREENFIELD 1" LH & RH 1/8 NPT. 2 TAPS HAVE CHIPPED THREAD WILL NOT PREVENT TAP FROM PRODUCING GOOD THREADS AS A INTERRUPTED TAP DOES. INTERRUPTED THREAD TAP

TWO ANVIL 261 4 INCH PIPE CLAMPS. CARBON STEEL PLAIN FINISH. PLEASE REVIEW MANUFACTURER'S SPRECIFICATIONS SHEET FOR SUITABILITY FOR YOUR APPLICATION BEFORE PURCHASING.

80 quart Kettle Corn Popper Product specifications: One complete 80qt kettle corn popping machine

General Specifications The absolute and gauge pressure transmitter model EJA510A and EJA530A can be used to measure liquid, gas, or steam pressure. Both output a 4 to 20 mA DC signal corresponding to the measured pressure, and also feature remote setup and monitoring through communications with the BRAIN™ terminal and CENTUM CS™ or ?XL™ or HART® 275 host. SUFFIX CODE : EDS4N-07DE/D1/KU2

New Yokogawa DP harp Pressure Transmitter With Chemical Seal Measuring System with Capillary (see pictures) A chemical seal measuring system is made up of a diaphragm seal attached to a pressure measuring instrument (pressure transmitter). This systems also include a capillary separating the diaphragm seal and measuring instrument which allows for remote reading. In all cases, the components of the chemical seal measuring system must not be separated.

TEKTON 7558 Tap and Die Set, Inch, 39-Piece

B-Line Systems B2011 Conduit to Strut Clamp; 1-1/4" Rigid 40 Sets New Old Stock purchased from a closed company. Non-retail packaging. • 1-1/4 Inch Nominal Pipe Size • Low Carbon Steel Clamp Material • 1 Number Of Bolts • Zinc Electroplated Finish