Heat shrink tubing kit with various sizes of 3:1 adhesive lined Polyolefin heat shrink in the color Clear. Custom color combinations available. Polyolefin tubing shrinks to 1/3 its original diameter with an inner layer that melts and then solidifies when cooled.
Heat shrink tubing kit with various sizes of 3:1 adhesive lined Polyolefin heat shrink in the color Black. Custom color combinations available. Polyolefin tubing shrinks to 1/3 its original diameter with an inner layer that melts and then solidifies when cooled.
THIS IS FOR Quantity (1) 4 FT. (48") OF 3M 3/8" HEAT SHRINK TUBING THIS HAS A 2:1 SHRINKING RATIO This auction is for one 48 inch piece but I have more available, just select the quantity you desire (will ALL come in 48" pieces). Has glue inside that seals and waterproofs!
THIS IS FOR Quantity (1) 4 FT. (48") OF 3M 1/4 HEAT SHRINK TUBING THIS HAS A 2:1 SHRINKING RATIO This auction is for one 48 inch piece but I have more available, just select the quantity you desire (will ALL come in 48" pieces). Has glue inside that seals and waterproofs!
Mil-Spec quality self-adhesive "side entry" heat shrink tubing, thick wall (.020" thick--about 2 business cards thick-standard thickness for heat shrink of this diameter) This item is: 1 each 50 foot roll. This is top quality military-industrial material. The adhesive is coated onto a one inch wide strip, covered by a "peel off" liner.
Important information Our valued customers must accept our store policies, terms and conditions before checkout. Please read the information below for your convenience. We are determ
GREENLEE 555SBC ELECTRIC EMT IMC RIGID PIPE TUBING SPEED BENDER 1/2" INCH- 2" INCH The GreenLee 555 Speed Bender will bend not only rigid pipe/ tubing but also EMT, and IMC...comes complete with shoe kit and rollers for all of your bending needs 1/2" through 2" shoe for 1/2" to 1-1/4" shoe for 1-1/2" to 2" roller set for 1/2"-2" 115V AC / cycles 60 / 11 Amp Believe in good working order, but I haven't taken the generator over to test it yet.
Welcome to my ebay auction/store! Thanks for coming! Up for your purchasing pleasure, a used IMPERIAL-CHICAGO number 364-FH HAND TUBING BENDER 3/8 inch.
1.5" cut pcs 100pcs/bag 1/4" Black HEAT SHRINK TUBING 1.5" cut pcs 100pcs/bag 1/4" Black HEAT SHRINK TUBING Minimum Shrink Temperature 121C Operating Temperature -55C to +135C 2 to 1 shrink ratio 1/4" to 1/8" Heat shrink polyolefin tubing is used as a strain relief on wire harness terminations, connectors and other types of wire terminations. It is also suitable for jacketing small wire harnesses or insulating wire terminal connections.
6" cut pcs 10pcs/bag 1/4" Black HEAT SHRINK TUBING 6" cut pcs 10pcs/bag 1/4" Black HEAT SHRINK TUBING Minimum Shrink Temperature 121C Operating Temperature -55C to +135C 2 to 1 shrink ratio 1/4" to 1/8" Heat shrink polyolefin tubing is used as a strain relief on wire harness terminations, connectors and other types of wire terminations. It is also suitable for jacketing small wire harnesses or insulating wire terminal connections.
These are plastic square caps used to protect the ends of light weight square tubing. These caps are for 1.25 inch square tubing and should fit tubing from .050 to .120 in (11 to 18 Gauge) wall thickness. The lot you are bidding on is a lot of 30.
These are plastic round caps used to protect the ends of light weight round tubing. These caps are for 1.25 inch round tubing and should fit tubing from .050 to .120 in (11 to 18 Gauge) wall thickness. The lot you are bidding on is a lot of 15.
These are plastic square caps used to protect the ends of light weight square tubing. These caps are for 3 inch square tubing and should fit tubing from .060 to .125 in (10 to 16 Gauge) wall thickness. The lot you are bidding on is a lot of 4.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
