Here we have a Precision Vacuum Tube Tester 920/ 954 series etc "B" Selector Switch ( Tested ) This was removed from a working 920 Precision Tube tester. I occasionally cannibalize a working piece of equipment to use the working parts to fix 7 or 8 others. Sacrifice one to get many more working.
Here we have a Precision Vacuum Tube Tester 900+ series "A" Selector Switch ( Tested ) This was removed from a working 920 Precision Tube tester. I occasionally cannibalize a working piece of equipment to use the working parts to fix 7 or 8 others. Sacrifice one to get many more working.
Here we have a Precision Tube Tester 920/954 etc "E" Selector Switch This was removed from a working 920 Precision Tube tester. I occasionally cannibalize a working piece of equipment to use the working parts to fix 7 or 8 others.
Here we have a Precision Tube Tester 920/954 etc "F" Selector Switch Tested This was removed from a working 920 Precision Tube tester. I occasionally cannibalize a working piece of equipment to use the working parts to fix 7 or 8 others.
Here we have RCA? 12AX7 Grey Plate BALANCED Top O Get Vacuum Tube Hickok Tested Hickok 752A Tested at 325/200 & 350/200 where 200 is the minimum Good value for this type of tube I have having a bit of a stab at the make as it looks identical to some RCA ones I have.
Here we have a NOS National 6BL8 ECF80 Grey Plate Foil Getter Vacuum Tube TV7 Tested 100%+rbox Reboxed as the original would have offered no protection during shipping. New Old Stock.. TV7 Tested
Here we have a Baldwin Organs ( Raytheon ) 12AX7 TV7 Tested Vacuum Tube Strong TV7 Tested. I have more than one of these for sale. The pictures shows one of the tubes on offer.
Here we have a Dumont NOS ( Re-Boxed )12GN7A / 12HG7 Vacuum Tube TV7 Tested 100%+ New Old Stock. Re-boxed as the original would have offered no protection for the tube during shipping
Here we have a NOS Thordarson 21F87 Bi 6.3V 3A Vacuum Tube Filament Transfomer Pri- 115VAC 50/60 Htz Sction 1- 6.3V VCT at 3ASction 2- 6.3V VCT at 3A New Old Stock. From years of storage some of the paint has flaked on the main body. TESTED OK.
High Temp Quartz Diffusion Tube Holder, Handler, Hot Tube Handling Device Quartz Boat/Tube Puller Measurements: Handle: Screw: 1.25" from handle Length: 7" Long to Fork Width: 1.0" ID Width: 1.4"~OD End (Fork): 5.25" Wide OD 2.5" Long OAL: 12" Information from the Patent: HOT TUBE HANDLING DEVICE
This is an energy compensated geiger counter probe tube. This is the TUBE ONLY. It has a 420 to 550V LND tube inside with a lead and cadmium filter to make the response normal over the entire detection range.
NOTE: THIS IS A STOCK PHOTO. THE SWITCH YOU WILL RECEIVE WILL AS GOOD OR BETTER THAN PICTURED. IT MAY BE A DIFFERENT BRAND BUT WILL HAVE THE SAME DESIGN.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.