40 of 1750 for sale, brand-new and used.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

FEATURES: The preferred pump frame in the cleaning industry Forged brass manifold with an exdlusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Available in left handed "L" version SPECIFICATIONS

Hot water boiler, heater, 210,000 BTU, Oil fired, Marine, Way Wolff, Ray Burner This is an unused hot water boiler made by Way Wolff, model 3434-10E. Boiler is a cylinderical design with the burner located on the top of the unit and the rectangular exhaust port on the side. These types of boilers are commonly used in marine applications but there would be no reason it could not be used in another application that requires similar specifications.

has a 15 gallon tank max psi is 3800 has a general electric 3 HP induction motor PH 3 volts 208-220/240 cycles 50: rpm 1455 amp 10.8/5.4 deg c rise 50 service factor 1 cycles 60: rpm 1750 amp 9/4.5 deg c rise 40 service factor 1.15

36" Wide x 7' Long SS Incline Conveyor White Food Grade Plastic Belt, Conveying SS Wash Down Motor SS legs included - Removed for shipping purposes 36” wide White Food Grade Plastic Belting 40" infeed elevation 48” discharge elevation SS Wash Down Motor 2 HP / 1750 rpm Electrical 208/230/460 volt / 60 hz / 3 phaseRemoved from a Major Food Plant Excellent Condition !!

Accumulation Table, SS Conveyor, 40” x 106" Long, Sorting Packing Conveyorwith Speed controller Can also be used as a feed or pack table 40" wide x 106" long + 24" additional infeed lane (3) 12" wide belt (1) 3.25" wide belt SS Construction Rexnord Plastic belt Side rails - adjustable Adjustable leg levelers SS legs Casters for easy mobility 36” Elevation 1/2 HP / 1750 rpm drive Dart speed controller Electrical 115 Volt / 60 Hz / 1 Phase

Consolidated SS Cap Elevator with SS Hopper, 12" Cleated Incline Conveyor Model FEH-15 Serial #729392 Incline conveyor is 12’ Long SS construction MS legs 12” wide cleated belt – some cleats are broken SS Hopper – 40” x 46” x 28” Deep with SS Top SS discharge chute 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottle caps Belt is showing signs of wear Last used in a water bottling plant Good Condition !! For More Information, EMAIL

Hytrol 24” x 25’ Long Powered Incline Case Conveyor Serial #488667 24” wide grip-rite black belt 28” wide frame 20’ Incline Length with 5' Long Infeed Conveyor 40" Infeed elevation (adjustable legs) 110" Discharge elevation (adjustable legs) 1 Hp / 1750 rpm drive Electrical 230/460 Volt / 60 Hz / 3 Phase Just removed from productionExcellent Condition !!

42” W x 10' Long SS Conveyor with SS Wire Mesh Food Grade Belt SS Frame construction SS Legs with level adjusters 42" SS Wire Belt 10' Overall length 40" elevation – adjustableSS Drip Pan with drain1 Hp / 1750 rpm drive (Center drive) Electrical 208/230/460 Volt / 60 Hz / 3 PhaseJust Removed from a Major Food PlantVery Good Condition !!

2009 Hoppmann EP08 SS Cap Feeder with Speed Controller Model #EP08/08 Serial #003046 2009 Year of Mfg. Last running ROPP aluminum caps SS Construction 8” cleated belt, 2" cleats on 6" centers SS Hopper - 38" x 40" x 20" Deep Pivoting elevation 96" discharge elevation (adjustable) Low cap sensor Hinged access top on hopper SS

We are no longer a vender for Corken and we are now liquidating our Corken pump inventory. Please do not hesitate to send me an offer for one of our pumps. We have around 16 different pumps up for auction so, if this pump is not what you are looking for please feel free to message me on inventory inquires.

Up for sale is a Brand New Goulds WS5012D3 Submersible Sewage Pump 5 HP 230 Volts 5 HP 230 Volts 1750 RPM 1 Phase 26.5 Max Amps Up for sale is the Goulds WS_D3 series Submersible Sewage Pump. All items included in this listing are brand new. Please refer to the included section in this listing.

Up for sale is a Brand New Goulds WS3012D4 Submersible Sewage Pump 3 HP 230 Volts 1-1/2 HP 230 Volts 1750 RPM 1 Phase 7.00 Impeller 21.5 Max Amps Up for sale is the Goulds WS_D4 series Submersible Sewage Pump. All items included in this listing are brand new. Please refer to the included section in this listing.

[ Goulds WS3034D3 3 HP 460 V 54 ft 1750 RPM Submersible Sewage Pump

36" DOALL VERTICAL BAND SAW THROAT CAPACITY - 36" WORK HEIGHT 13" BAND WIDTH 1/16"TO 1" BAND LENGTH 2 WHEEL - 122" BAND LENGTH 3 WHEEL - 166" TABLE SIZE 26 1/2 " X 33 1/2" AUXILIARY TABLE - REAR- 16 1/2 " BY 20" RIGHT TABLE TILTS - 45 DEGREE LEFT TABLE TILTS - 10 DEGREE LOW RANGE 50 TO 300 FPM HIGH RANGE 850 TO 5200 FPM ELECTRICS 3/60/240 MAIN MOTOR 3 HP AROUND 80"X 40"X 80" FLOOR SPACE WEIGHT APPROXIMATELY - 1750 - 1800

NP0355 Waukesha Cherry-Burrell Model No. 006 Universal 2 Series Rotary Lobe Positive Displacement Pump Each item is guaranteed to be fully operational and in great condition unless otherwise noted. 316 Stainless Steel Universal II Pump with Gear Reducer and Motor.

Harbor Precise Industries Oil Chiller, HBO-250PTSB3 380~415V 50/60Hz

Hytrol 24” x 25’ Long Powered Incline Case Conveyor Serial #488667 24” wide grip-rite black belt 28” wide frame 20’ Incline Length with 5' Long Infeed Conveyor 40" Infeed elevation (adjustable legs) 110" Discharge elevation (adjustable legs) 1 Hp / 1750 rpm drive Electrical 230/460 Volt / 60 Hz / 3 Phase Just removed from productionExcellent Condition !!