40 psi for sale, brand-new and used.

Pressure Gauge, MILJOCO P4598L-04, 0-60PSI, 4.5 in Pressure Gauge, Gauge Type Mechanical Contractors, Dial Size (In.) 4-1/2, Range 0 to 60 psi, Dial Size (mm) 115, Connection Size 1/4" NPT, Connection Location Lower, Smallest Graduation (PSI) 1, Accuracy (%) +/-1, Case Material Stainless Steel, Socket Material Brass, Tube Material Phosphor Bronze, Lens Material Acrylic, Ring Material Stainless Steel, Operating Temp.

REF Dynamics Hydraulic Test Station Model HCT-40 This is a completely self contained test system used for testing various hydraulic components, valves, hoses, actuators, etc. This test station was previously used during the test and manufacture of space and marine products used in such endeavors as the Titanic exploration and recovery expedition.

Up for bids is a new SPX P19L manual hydraulic pump. Good looking, sleek design. This is a government surplus item that I believe was issued but never used.

Heat Exchanger: Ratings: Operating Pressure - 300 psi Test Pressure - 300 psi Operating Temperature - 350 Degrees F PSI - 1000 Material: Tubes: Copper&

Product Description : Pneumatic Actuated Ball Valve, Operation Double Acting, Body Material Stainless Steel, Full Port, Valve Structure Two-Piece, Pipe Size 1-1/2 In., Max. Pressure 1500 psi WOG, 100 psi Steam, Max. Inlet Pressure 145 psi, Body Style Inline, Mount Direct, Required Pressure 40 psi, Ball Material 316 Stainless Steel, Seal Material TFE, Seat Material PTFE-TFM, Stem Material 316 Stainless Steel, Temp.

COMPACT, LIGHTWEIGHT AND PORTABLE. SINGLE-SPEED PUMPS DESIGNED TO DRIVE SINGLE- ACTING CYLINDERS. The power unit of choice for major manufacturers of auto body, frame straighteners and other equipment.

LIBERTY ***Centrifugal Pump***

Grundfos Circulating Pump UPS32-160 F New In Box, Never Used or Installed Sku: 96402730 Note: This circulator requires: 539605: 1-1/2" Cast Iron Flange Set (For UP43 Flange Mounted Pumps Only) Cast Iron GF 40/43 Flange Mount Model: UPS32-160/2 Normal Flange Size (in.): 1.5" Motor HP: 3/4 Voltages: 115 PH:1 Specs

Item Description: Dayton Pumps 2PC39 - Dayton 2PC39 Booster Pump. The Dayton 2PC39 Booster Pump increases pressure from city mains, or pump water from cisterns and private ponds to ensure the proper operation of filtration equipment. The 2PC39 is Self-priming up to 10 ft.

New in Box For water supply systems For use with submersible well pumps or as a replacement switch Turns on at 30 psi and off at 50 psi Adjustable up to 40/60 psi or down to 20/40 psi

Item Descritpion: Convertible Jet Pump, Thermoplastic, 1 1/2 HP, 115/230 Voltage, 19.2/9.6 Amps AC, Suction Pipe Size 1 1/4 In., 1 NPT Outlet, Suction Lift 0-110 Ft., Max. Case Pressure 75 PSI, Shut Off 64 PSI, Motor Enclosure ODP, Max. Inlet Pressure 75 PSI, Seal Type Mechanical, Length 17.75 In., Width 10.25 In., Height 12 In., Includes Pump, Pressure Gauge and Built In Pressure Regulator.

PRODUCT OVERVIEW

BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 1 MAXIMUM CAPACITY: 20.7 GPM (shallow setup)

PRODUCT OVERVIEW Model # DP550C

Performance Data Flow Range: 0-31 GPM Head Range: 0-31 Feet Minimum Fluid Temperature: 40 degrees F (4 degrees C) Maximum Fluid Temperature: 230 degrees F (110 degrees C) Maximum Working Pressure: 125 PSI Connection Sizes: 3/4", 1", 1-1/4", 1-1/2" Flanged The Taco High Velocity Series 0011 Cartridge Circulator is specifically designed for high-head/medium-flow applications in large residential/light commercial closed-loop hydronic heating and chilled water cooling systems.

[ Dayton 1/2 HP 115/208-230 V 50 Ft 75 PSI Centrifugal Pump

PRODUCT OVERVIEW Model # DP550CInternet # 204480030Store SKU # 1000026688 The Everbilt 1 HP cast iron convertible jet pump has superior performance at depths to water to 70 ft. or less. Self priming after pump housing is initially filled.

Ansul FORAY, A05, Dry Chemical Extinguisher Retail $85. I took one out of the box to take pictures. The one you will recieve will be in a sealed box.