432 6 for sale, brand-new and used.

6" Monochrome HMI touch screen / operator interface panel. Fully functional with some wear and tear visible on the bezel and screen protector (see pictures). Includes power terminal connector and USB programming cable.

Siemens Part number is 6ES5432-3BA12 6ES5 432-3BA12. Siemens Simatic S5. E-STAND 2.

Newest Hot DS3231 Precision RTC Module Memory Module for Arduino Raspberry pi

Here we have a new, still in the box, Furnas 54LA81 limit switch. This switch has a coil spring actuator that extends straight up from the switch. Pressure applied to the spring from any direction will actuate the switch.

Here we have a new, still in the box, Furnas 54LA12 rotary type limit switch. It has SPDT momentary contacts and is rated for oil tight use (NEMA 13). It has a tapped 1/2" NPT conduit hub in the bottom for connection of wiring.

AC Servo Motor AM2G-175B-B380 Rated 336.3 In-lbs(38Nm) 1500 RPM Each motor comes with a standard 5000 line incremental encoder. Absolute encoder option is available at additional cost. Matching servo drives and cables are also available.

NEW NORD GEAR BOX MOTOR COMBINATION MARATHON 1 HP TEFC 1750 RPM 230/460 Volt 3 Phase. I have 6 of these available. This listing is for the quantity of one.

Agilent J2298B T1 Interface Module Agilent/HP J2298B T1 Interface Module Plug in module for the Agilent Internet Advisor series for T1/DS DS1 (1.544 Mb/s) J2298B This interface comprises a choice a plug-in module (J2298B) suitable for plugging into the J2300C/D Advisor mainframe and the J2900A High Speed undercradle. The J2298B has RJ-48C connectors. These modules handle cell and frame-based technologies, i.e.

PLEASE CALL FREE 800-544-3746! LIVE HELP EXPERT ADVICE TECHNICAL SUPPORT 800-544-3746! !!!

GigaVUE-2404 Md-density Traffic Visibility Node Node Was Fully Tested And Works 100% GigaVUE-2404 FULL REFUND IF NOT SATISFIED!

Tektronix TDS744A The TDS744A 4 Channel Digitizing Oscilloscope has a bandwidth of 500MHz and a sample rate to 2 GS/s. The maximum record length is 50,000 points per channel. The instrument is fully programmable via GPIB (IEEE 488.2) and has GPIB, RS-232 and Centronics I/O ports.

This small preamp module was made for Ball Aerospace, and is amazing! It uses the RFMD pHEMT device type SPF-5122Z in a two stage design, with the second stage being a balanced type. The whole assembly runs off 5 VDC at about ~225 mA.

This is a microwave synthesizer, with power supply and LCD/Keypad controller, complete. It covers 6.080-6.580 GHz in 1 KHz steps. It was used in a DSCS downconverter to cover the 7.25-7.75 GHz band.

FOR SALE Group LOT OF 93 MADE IN USA BY MICHAEL ENGENERING LTD

DEMO NSS Charger 2717 DB 27-inch under 50HR The Charger 2717 DB battery burnisher is a completely new design, producing a wet-look shine without the need for operator adjustment. LIST NEW FOR OVER $8,000 !!! 27-in./69-cm work path 3.6 HP pad drive motor delivers 1700 RPM pad speed Six 6V, 325 AH batteries for up to 3 hours per charge Hinged 90° head mechanism for compact storage and standing pad changes

NEW NSS Charger 2717DB battery burnisher 27-inch LIST NEW FOR OVER $8,000 !!! The Charger 2717 DB battery burnisher is a completely new design, producing a wet-look shine without the need for operator adjustment.

Used Charger 2717 DB 27-inch Battery NOT INCLUDED The Charger 2717 DB battery burnisher is a completely new design, producing a wet-look shine without the need for operator adjustment. LIST NEW FOR OVER $8,000 !!! For 6/6V 205 AH NEW Battery ADD $500 27-in./69-cm work path 3.6 HP pad drive motor delivers 1700 RPM pad speed