Piezoelectric Transducer, Sonalert, 6-28 VDC, 4500 Hz ±500 Hz, 68-80 dB(A) Mallory #SC628HP The Mallory Sonalert produces an audible tone by internally creating an oscillating signal which drives a piezo ceramic transducer mounted in a sound chamber. Self driven piezo ceramic transducers are superior to electromagnetic buzzers because they produce no arcing, electrical noise, or mechanical wear during operation.
PNEUMATIC ROTARY ACTUATOR, PARKER MODEL #HP4.5-1803-AA9-0147 SINGLE RACK AND PINION ROTATION, 180 DEG. PORTS, 3/4" NPT HOLLOW DRIVE, 2" INSIDE DIAMETER WITH KEYWAY MAX PSI, 100 AIR TORQUE RATING, 4,500 INCH LBS. @ 100 PSI MOUNTING, THERE ARE THREADED MOUNTING HOLES ON BOTH SIDES
SIEMENS 1FT60841AH714EH1SERVO MOTOR 4500 RPM 20 NM EQN GENERAL INFORMATION: MANUFACTURED BY: SIEMENS MANUFACTURER PART NUMBER: 1FT60841AH714EH1 DESCRIPTION: SIEMENS 1FT60841AH714EH1 SERVO MOTOR 4500 RPM 20 NM EQN 24VDC 3 WATTS ABS ENCODER BRAKE CONDITION:FNFP - THIS IS A NEW ITEM IN ITS ORIGINAL PACKAGE, THE PACKAGE MAY HAVE BEEN OPENED FOR INSPECTION AND/OR OTHER PURPOSES.IF YOU HAVE ANY QUESTIONS PLEASE CALL! (586) 741-5274
1664UC2E.58 New Dormeyer Products (Division of Saia Burgess), 18 Volt DC Solenoid Actuators, Manufacturer Part Number 198539-001, Customer Part Number 4550-0001-01. Each bid quantity is for a Lot of Four (4) Solenoids. You may bid / buy any number of lots, up to the total quantity available above.
This is a lightly used Omega Engineering pressure transducer PX425-030AV. It has a range of 0-30 psia and PX425 series are millivolt output range, high-stability transducer series (see specs below). Lead is about 1 - 2 inches shorter than original but still very long.
Up for sale is one brand new Industrial grade Lytron/Northwire Power Cord/Line Cord per part number 250-0262. Original price was 128.00 per assembly. Spec includes-250 volts, CSA 19512, 3/C, SJT, 60 C, VW-1, 18 amps, 4500 watts, 14 gauge wire C13 to C14 female and male connector ends.
Igarashi 12 VDC Motor - 4500 RPM - 12 V - Toy Car and Hobby Motor - High Torque Motor manufactured by Igarashi Removed from new equipment. Motor may have traces of solder on terminals Operates on 12 VDC nominal Recommended operating voltage range 6 VDC to 15 VDC No load speed at 12 V: 4,500 RPM No load current: 50 mA Full load (maximum efficiency @ 12 VDC) performance characteristics: Spe
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.