Aluminum Angle 1/2 ” x 1/2 ” x 24 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength Description – This angle is a higher strength / anodized version of our popular 3/4in aluminum angle. Almost everything about it is better. It is substantially higher strength, higher corrosion resistance, and lighter weight.
Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.
Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
Aluminum Angle 5/8” x 5/8” x 48 in, 1/16 in thick, 5/8 IN x 5/8 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Offset Angle 1” x 2” x 48 in, 1/16 in thick, 1 IN x 2 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 2” x 2” x 48 in, 1/16 in thick, 2 x 2 in, NEW!, Angles Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick. They measure 2 x 2 x 48 inch.
For pricing or shipping discounts, combination orders, volume discounts, purchasing over the phone, or general information please call me on my cell at: (six, seven, eight,)-(two, zero, zero)-(zero, eight, six, two). Aluminum Angle 1/2 ” x 1/2 ” x 48 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – When
Aluminum Round Tubing – 1.5" OD x 1/16” x 248" Long NEW, .062, 1.5 IN Description – These are a product of our solar panel division. They measure 1.5" OD x 1/16” x 24 inch. I also have this in 24in lengths.
Oshlun SBNF-100060 10-Inch 608 Tooth TCG Saw Blade with 5/8-Inch Arbor for Aluminum Cutting!!! Nonferrous blades have been designed with a negative hook angle, triple chip tooth grind, and precision ground micro grain carbide tips. The specially formulated tungsten carbide lasts longer than other carbide grades
NEVER USED BRAND NEW Portable In-Room Infectious Patient Isolation System Quickly Converts any Patient Room into a Negative Pressure Isolation Room The high-tec
Eaglerockemporium Store Johnson Level &Tool Elevating Aluminum Tripod 40-6880 5/8" Thread 45" Tall for 40-6880 Laser Level (not included)Lightweight, aluminum tripodAdjusent range from 1' 4" to 3' 9" (nominal length) includes elevating column with fine adjusent knobs5/8" - 11 threadListing Accuracy Disclaimer: Please refer to photos for the most accurate description of the product.
Aluminum Angle 1-1/2” x 1-1/2” x 48 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – People buy these angles for making their own silk screen frames. You must cut these to the dimensions you need and fasten or rivet them together.
New, Tekton Tubing Bender, Aluminum alloy construction with durable baked enamel finish, Calibrated to bend angles up to 180, Smoothly bends copper brass, aluminum, and thin walled steel tubing without crimping, Three channel design fits 1/4", 5/16" and 3/8" O.D. tubing, Ideal for water, gas, refrigerator and brake line applications.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.