V-Belt Pulley Crankshaft From Man B18A/1 Oldtimer Tractor The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
CHAMPION AIR COMPRESSOR HR10-12 3PHASE 10HP COMPRESSOR WAS PURCHASED FROM AUTO REPAIR SHOP CLOSING DOORS 2 YEARS AGO. HAS BEEN TESTED THE ELECTRIC MOTOR IS PERFECT CONDITION ALONG WITH THE PUMP. TANK IS CLEAN AND SEALED TIGHT WITH NO LEAKS OR RUST.
This is a real nice original cast iron pulley for an International Harvester Famous, Titan, or Mogul hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind except for two cracks in the spokes right by the hub. I don't think this would hurt anything to use it like this or it would be a great candidate for stitching.
This is a rather hard to find original cast iron pulley for a Fuller and Johnson hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This is a rather hard to find original cast iron pulley for a hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This auction is for one new old stock Auto Grace 6 hp., single cylinder, water cooled, Lister type diesel engine and accessories. I imported theengine from India in 2001 and it has been in storage. The engine has been uncrated but never started since I've owned it new.
Pulleys and Belting, by the staff of International Correspondence Schools, published by International Textbook Co., Scranton, PA, 1929, ICS # 2448, Edition 1. 5 1/2 x 8 1/2 softcover, 40 pages. Reprinted in 2011 by Nation Builder Books, Mebane, NC.
This clutch pulley is made by Edgemont Machine Company, & is a bolt on style clutch pulley. The Pulley is 16 inches diameter. The bolt on plate is 12 & 3/8 diameter.
Here we have the cast iron bolt-on pulley with the place to put the starting crank in the hub. The pulley measures 1 7/8" X 6 5/8" and has no breaks or repairs to it.
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 1 1/2" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
YOU ARE LOOKING AT A NEW PAPER PULLEY THAT WILL START AT A VERY LOW PRICE.( THIS PULLEY IF YOU HAD ONE BUILT WOULD COST OVER $155.64 ) PULLEY WAS MADE BY paper pulleys inc. 5 1/2"OD X 7" FACE WERE BELT RUNS X 1 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY ?
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 3/4" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
This is a rather hard to find original drive pulley for a Pickering or other make of governor. These governors were commonly used on steam engines and some larger gas engines and tractors. It is in excellent used condition with no cracks, breaks, or repairs of any kind.
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
