5 8 rebar for sale, brand-new and used.

Vintage Willard Mfg. Heavy Duty Rebar Cutter/Bender, 5/8 Capacity, MADE in USA ~ This is a used, perhaps considered vintage, heavy duty rebar bender and cutter. This was made in the USA by the Willard Manufacturing Co.

Im retired and have no more use of using my heavy duty rebar cutter that im selling it and it works excellent. The DC-25X portable heavy-duty rebar cutter will safely, efficiently, and cleanly cut rebar up to #8 (1”) diameter grade 60. The DC-25X cutter is ideal for a small fabrication shop, especially if used with our CWS-2025 WorkStation.

HUGE LOT of Carlon PVC Conduit Spacers, Asst Sizes

This Greenlee Cutter Die requires no adjustments for cutting different materials. 00950 is less costly than a dedicated cutting tool and is simple to install in crimping tools. Kearney Style 00950 works with any crimping tool that accepts 12-ton U type Kearney PH2 type dies and will cleanly cut guy wire (including EHS), grade 60 rebar, ground rod, soft steel bolts up to 5/8 inch (16mm) and up to 477 MCM (240 mm2) ACSR.

Huskie Tools S-SERIES Tool cut anything from Guy Wire to Anchor Rod and most over head and under ground cables. The S - Series cutters are portable, light weight and made to last years under the toughest field conditions. OUTPUT:6.3 TONS,WEIGHT: 12LBS,LENGHT : 23",JAW OPENING : 1-1/2" CAPACITIES : Wire rope :20mm,3/4",Rebar/ground and anchor rod :16mm,5/8",Cu & Al wire 40mm,1-1/2" ACSR :40mm,1-1/2" tool is new never used case is a little dirty from sitting on self

var itemNumber = window.ebayItemID ?

You are considering a huge lot of Exothermic Welding items. All of the items you see in the pictures are included. All of these items are used surplus and most appear to be in good usable condition.

IWS-550 Portable Rebar Tying Machine Tying Range from 15-58mm(dia) *Name: Battery Powered Rebar Tying Tool *Adopt Brush twistin

start_elivehelp_btncode end_elivehelp_btncode

3M 00051141202358 (TM) Cut-Off Wheel Tool 20235, Pneumatic Po

TOC Pro Dry Diamond Core Bit for Concrete 5/8-11 Thread - 6" TOC Pro Dry Diamond Core Bits for Concrete is designed to drill through hard and reinforced concrete dry or wet, with hand held grinders. 5/8-11 thread for hand-

16" Premium Concrete Core Drill Bit 1-1/4 -7 Threads Our premium diamond core drill bits for concrete are designed to drill deep into concrete. Concrete is more abrasive than granite. As a result, our diamond segments for concrete core drill bits are formulated to be more tightly bonded to ensure both life and drilling speed.

11" Premium Concrete Core Drill Bit 1-1/4 -7 Threads Our premium diamond core drill bits for concrete are designed to drill deep into concrete. Concrete is more abrasive than granite. As a result, our diamond segments for concrete core drill bits are formulated to be more tightly bonded to ensure both life and drilling speed.

Commercial quality concrete molds, strong and guaranteed for 100+ uses! Designed by an architect and product designer with several patents under his belt. 13 Piece Mold set!

THIS ITEM IS A NORTH AMERICAN CLUTCH ( NORAM) WITH THE NUMBER # 123094 STAMPED ON HOUSING THE CRANK BORE MEASURES 1-7/16" WITH KEYWAY SLOT THIS HAS A DUAL BELT SETUP WHICH I AM GUESSING USES 5/8" OR BIGGER BELTTHE HEIGHT OF IT FROM THE TWO BELT SIDE IS 5"THE HEIGHT OF IT FROM CLUTCH SIDE IS 6-9/16"THE WIDTH IS 3-3/4"THE CLUTCH HAS