5 8 wheel for sale, brand-new and used.

Offered to you for your immediate purchase and Free Shipping in the USA One NOS CARBORUNDUM 3259278 BBR 20 x1/8 inch Grinding Wheel 4 mounting holes and 34 other holes in a spiral pattern in it . The center mounting hole is 1 inch diameter the other three are 5/8 inch diameter and are not all equally spread apart 2-1/2 to 2-3/4 I assume sto make sure it doesn't run backwards to the design of the wheel.

Colonial West "Green" Grinding Wheel: Dimensions 6" x 3/4" x 1 1/4" wheel specifications GC 60 J5 VS1 Max RPM 4450 Green Premium silicon carbide grain – Used primarily for bench and pedestal offhand grinding of carbide and ceramic tools. Formulated for grinding non steel materials, cemented carbide, titanium, composites and plasma sprayed materials.

Norton Premuim Grinding Wheels. 13 Wheels. This is a lot sale of wheels that cost me $525 new.

We offer precisely produced profile grinding wheels meeting highest quality standards only, by company BALTIC ABRASIVE TECHNOLOGIES (Europe). Contact us for combined shipping. Thanks for the huge experience CBN borazon wheels have very long working life and also acquire perfect band saw teeth finish.

TTC Dish Style Diamond Wheel - WHEEL DIAMETER: 6" WHEEL THICKNESS: 1" Hole Diameter : 1-1/4" Diamond Depth: 1/8" Rim Width: 1/4" 100 Grit 1/8" 100 GRIT DISH STYLE DIAMOND WHL TTC

LISTING IS FOR A NEW SURPLUS JARVIS HAND TAP BRAND-&

For sale, a vintage grinding wheel hub, made to mount a grinding wheel with a 5" bore. There are no markings on this hub, but I'm guessing that, because of its' age and the fact that it uses M10 metric socket cap screws to bolt down the flange, this might be a European-made hub. The taper of the bore measures approximately 2.225" x 1.995" x 2 2/8" long, or about 7.5 degrees.

For sale, 2 Myford grinding wheel hubs, to be used on the Myford cylindrical grinders. There are no markings on either hub, but in doing a little research, they very much look like the older Myford wheel hubs. Both hubs are made for grinding wheels with a 3" bore, have a taper that measures about .950 x .645 x 1 5/8" long.

This is a complete set of the wheels to build your own 2” x 48” or 2” x 72” belt knife grinder. This listing includes: One - 4” drive wheel with a bore sized for a 5/8" (.625”) drive shaft with a 3/16” keyway. It is also broached to use with keyed shaft or can be used with a smooth shaft with a flat ground on it for the set screw.

Wet/dry wheel combination sharpens, hones, and hollow grinds all kinds of tools from lawn mower blades to screwdrivers. Includes tool rest and eye shield. Maximum speed: 160 RPM wet 3450 RPM dry Wheel diameter: 8" wet 6" dry Wheel face: 1-5/8" wet 13/16" dry Shaft Diameter: 1/2" wet 5/8" dry Volts: 110 Amps: 3.4 Shipping Weight: 30.20 lbs.

Brown & Sharpe Wheel Truing Attachment: This is a Continuous Radius and Tangent Wheel Truing Attachment designed to form, with one continuous movement of the diamond, accurate radii on grinding wheels with accurate tangents at either or both sides of the radii. Convex radii up to 1/2 inch, with tangents to 5/8 inch in length in any direction from parallel to the side of the wheel to 110 degrees away from the side, can be formed.

This is a used Dumore No. 44 Tool Maker tool post grinder. Includes metal case, 5 pulleys, belt, several used stones, wrenches, adapter spindle for 1/8" shank stones and adapter spindle for 1/4" bore grinding stones, diamond wheel dresser.

SCREW TAP GRINDER SHARPENER GRINDING MACHINE MR-Y3C M5 - M20

SCREW TAP GRINDER SHARPENER GRINDING MACHINE MR-Y3 M5 - M20

SCREW TAP GRINDER SHARPENER GRINDING MACHINE MR-Y3 M5 - M20

SCREW TAP GRINDER SHARPENER GRINDING MACHINE MR-Y3C M5 - M20