5/16 4 flute end mill for sale, brand-new and used.

Used Good Condition Garr (Lot of 5)

This is an older unit, used very little. Base measures 2" X 3.5" total.Vertical surface is about 2 X 2 and the angled surface is 2 X 1 11/16.It has a 3/4" bore in the work holder with a 5/8" sleeve and a 1/2" sleeve.Indexes for 2 or 3 or 4 flute.Condition is goodShipping is free.

These are re grinds from a machine shop. They were leftover from a job no longer ran. No chipped flutes, tips are sharp not radiuses.

Up for grabs is a huge lot of machine end mills, till bits, inserts, and reamers. Included is the following: 1. 5 new Super Morse br12883 carbide tipped single point lead angle turning tools size 3/4 2.

morse nos endmill 1/4, 1/2 tap 5/16-24 nf gh3 5/16-18 nc gh2 1/4-20 gh2

SOLID CARBIDE 5/16" X 3/4" X 2-1/2" OAL 2 FLUTES SINGLE END MILL. Radius Corner. Condition is Good, needs light sharpening.

Used mills. Only Slight nicks or chips.Can be resharpened or possibly used for roughing

Chipped and or dull. Needs resharpened. Kennametal (Lot of 5) 5/16" x 13/16" LOC x 2- 1/2" OAL

4 Flute

You are bidding on a New York Twist Drill Corporation Flute On the box the following is stamped: Cobalt Single End Mill 4 Flute #705-87101 center cut Please review pics and ask all questions prior to bidding. thanks,

INDEXABLE END MILL MADE BY FETTE GERMANY INDEXABLE END MILL CONDITION = NEW THIS IS POSITIVE RAKE INDEXABLE END MILL COOLANT THROUGH ACCEPTS ANY CCMT-32.5_ (1) CCMT-32.51 TIN COATED INSERT

SGS - 5/16 Inch Diameter, 13/16 Inch Length of Cut, 4 Flutes, Solid Carbide Single End Square End Mill AlTiN Coated, 2-1/2 Inch Overall Length, 5/16 Shank Inch Diameter, Spiral Flute, 30 Helix Angle, Centercutting, Regular Length Type

1/16 carbide end mill 4 flutes usa made 4 flute single end diameter-1/8 shank diameter-1/8 lenght of cut-.200 lenght-1.5

New 1/16 carbide end mill 4 flutes tin coated usa made 4 flute single end diameter-1/16 shank diameter-1/8 lenght of cut-.125 lenght-1.5