5/8 shaft for sale, brand-new and used.

[ Dayton 3/4 HP 208-230/460 V 1725 RPM General Use Motor

Dayton Fan Motor, 1/3 HP, 1100, 115 V, 48YZ, TEAO - 4ETE5 Air Circulator Motor Air Circulator Motor, Permanent Split Capacitor, Totally Enclosed Air-Over, 1/3 HP, Nameplate RPM 1100, Voltage 115, Full Load Amps 4.2, 60 Hz, 1 Phase, NEMA/IEC Frame 48YZ, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number of Speeds 2, Yoke/Stud Mounting, Sleeve Bearings, Auto Thermal Protection, Rotation CCWLE, Body Dia 5 5/8 In, Length Less Shaft 6 5/8 In, Shaft Dia 5/8

3 Step PULLEY 3/4" Shaft 4"

COUPLER - Four ( 4 ) new couplers for one price - ( Peleton 0639 ) will fit a 17MM keyed shaft - the keyway itself is 6MM - the coupling is 3 1/8 in. diameter overall - 1 3/4 in. of metal hub length that goes on the shaft that includes a 3/16 in.

COUPLER - 2 ( two ) new couplers for one price - ( Peleton 0639 ) will fit a 17MM keyed shaft - the keyway itself is 6MM - the coupling is 3 1/8 in. diameter overall - 1 3/4 in. of metal hub length that goes on the shaft that includes a 3/16 in.

Wavetek 75 Ohm Rotary Attenuator Pair 0- 70 dB in 10dB steps and 0-10 dB in 1 dB steps 0-10 dB Attenuator: Part Number : Wavetek 7510-05 VSWR: 1.1 Max dc - 500 MHz / 1.2 Max 500 MHz - 1000 MHz Rotation: Attenuator increases in clockwise direction Impedance: 75 Ohms Frequency Range: dc - 1000 MHz Insertion Loss: 0.2 dB max Angle Between Steps: 30 degrees Maximum Input Power: 1 watt

Sunnysky X3508S KV580 Brushless Disc Motor for Quadcopter Multicopter Dynamic BalanceDescription: Sunnysky X3508S KV580 Brushless Disc Motor for Quadcopter Multicopter Dynamic Balance Specifications: - Stator Dia.: 35mm - Stator thickness: 8mm - No. of stator arms: 12 - No.

This is for (5) pieces... AU8835X 100000 ohm variable 10 turns from min to max setting.. shaft is thin, about 1/8 inch 3 prongs are 90 degrees to shaft for mounting General Description: Resistor, Variable, 100

Pressure Washer Horizontal Pump 3200 psi 2.5 GPM Fits Most 3/4 Shaft Pressure Washer Pump has the followingFeatures:

Lightly Used Galvanized Eye Bolt. 13" total Length, 10" Shaft Length. 5/8" shaft width.