50 hp dc electric motor for sale, brand-new and used.

Used as demo model. RPM: 1800 AMP RATING: .28 VOLTAGE: 90 DC HP: 1/50 Dimensions: Shaft is 5/16 dia by 1 1/2 long. The motor is 2 1/2 sq by 4 1/2 long.

THN 3362 - General Electric Safety Switch ( This item is NEW SURPLUS in excellent working condition) • Authentic General Electric Product • Heavy Duty Safety • 240/480/600 V Ac Voltage • 125/250 V Dc Voltage • 60 Ampere • Power Rating 10 Hp At 240 Vac 1 Phase, 20 Hp At 240 Vac 3 Phase (Nec Standard) • 50 Hp At 480 Vac 3 Phase, 60 Hp At 600 Vac 3 Phase (Time Delay Fuse) • 5 Hp At 125 Vdc, 10 Hp At 250 Vdc • 3 Pole • 3 Wire • Non Fusible Fuse • Switching Neutral

RELIANCE ELECTRIC DC MOTOR CONTROLLER (QTY-2) USED DC1-40U 115/230 VOLTS 1.0/2.0 HP 1PH 12.5MAX AMPS DC OUT 90/180 VOLTS DC FLD 50/100 VOLTS

Bodine Electric Company Model/Part Number: NSH-11D3115 Volts DC.33 Amps 1/50 HP 96 RPM 8.7 lb-in Torque 18:1 ratio1/2" shaft Has 15 inches of lead wire.Factory connector has been removed The manual can be found online by searching the part number

GE THREE PHASE SAFETY SWITCH THESE ITEM IS BRAND NEW, AND IS FINAL CONFIGURED IN OUR MOTOR SHOP 3-PHASE MOTORS UP TO 7.5 HP MOST OF THE EQUIPMENT IN YOUR SHOP SHOULD HAVE A SAFETY DISCONNECT WITH TIME DELAY (SLOW BLOW) FUSES OF THE PROPER AMPERAGE INSTALLED. AN ELECTRICAL MOTOR TAKES A LOT MORE ELECTRICITY TO START THAN IT DOES TO CONTINUE OPERATING. THIS MEANS THAT A SLOW BLOW FUSE IS A GREAT WAY OF PROTECTING THE CIRCUIT.&n

GE OUTDOOR THREE PHASE SAFETY SWITCH THESE ITEM IS BRAND NEW, AND IS FINAL CONFIGURED IN OUR MOTOR SHOP 3-PHASE MOTORS UP TO 7.5 HP MOST OF THE EQUIPMENT IN YOUR SHOP SHOULD HAVE A SAFETY DISCONNECT WITH TIME DELAY (SLOW BLOW) FUSES OF THE PROPER AMPERAGE INSTALLED. AN ELECTRICAL MOTOR TAKES A LOT MORE ELECTRICITY TO START THAN IT DOES TO CONTINUE OPERATING. THIS MEANS THAT A SLOW BLOW FUSE IS A GREAT WAY

GE SINGLE PHASE SAFETY SWITCH THESE ITEM IS BRAND NEW SINGLE PHASE MOTORS UP TO 7.5 HP MOST OF THE EQUIPMENT IN YOUR SHOP SHOULD HAVE A SAFETY DISCONNECT WITH TIME DELAY (SLOW BLOW) FUSES OF THE PROPER AMPERAGE INSTALLED. AN ELECTRICAL MOTOR TAKES A LOT MORE ELECTRICITY TO START THAN IT DOES TO CONTINUE OPERATING. THIS MEANS THAT A SLOW BLOW FUSE IS A GREAT WAY OF PROTECTING THE CIRCUIT.

Filtered SCR DC Basic Speed Control (Open Chassis) Bodine #830 Product Description: Bodine’s versatile Type-FPM SCR controls are intended for use with Bodine’s 130VDC Permanent Magnet (PM) 1/50 to 1/3 HP motors. Each control can cover a range of horsepowers, and can be adjusted for use with a particular Bodine motor by simply setting a “DIP switch” and selecting the proper armature fuse. Type-FPM controls provide pure DC (negligible ripple, Form Factor 1.0) to the motors.