55 500 for sale, brand-new and used.

Motor+Drive: ECMA-C20604SS+ASD-B2-0421-B Package Content: 1* 400W AC servo Motor 1* 400W AC Servo Drive 1* 3M Encoder Cable & Power Cable

Motor+Drive: ECMA-C20602RS+ASD-B2-0221-B Package Content: 1* 200W AC servo Motor 1* 200W AC Servo Drive 1* 3M Encoder Cable & Power Cable

400V Three-phase 9.0A 3.7KW FRN3.7F1S-4C FUJI FRENIC-VP Inverter

FieldServer Technologies Gateway FS-B2510 Dual Serial – Ethernet The FS-B2510 FieldServer Gateway provides two serial ports and one Ethernet port making it ideal forinterfacing either two serial devices or a serial to Ethernet connection. An example is a fire alarm panelusing a proprietary manufacturer’s protocol needing to supply alarm information to a building automationsystem. In a single, comprehensive package the FS-B2510 provides the hardware and softwarenecessary for this translation.

Siemens 6SE3212-8CA40 Micromaster MMV55/2 Vector Inverter Motor output rating 0.75HP / 0.55kW Input: 208V - 240 V +/-10% 1-3-PH 47-63 Hz Output: Continuous output @ 230V 1.14 kVA

This was acquired through a federal bankruptcy sale. It was found in the original manufacturer supplied shipping crate. It looks to be new.

Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 42HS03 0.34N.m New DM320C

Hilscher CIF50-DNM CIF-50 DeviceNet Master Communication Interface Card/Board PCI Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Hilscher and may vary slightly due to upgrades, options, or revisions this unit may or may not have.

These items were left over items from previous projects. Our inventory changes often. If there are other Wago items you are in the market for, please message me and I will check inventory.

Siemens Access 9340DC Power Meter with Enclosure, Documentation n

ROSEMOUNT Integral Manifold Model 0305AT32A11BA Smart Family Hart Max W.P. 3626 PSI / 250 BAR Supply 10.5 - 55 VDC Output 4 - 20 mA Cal.

Check out my other items! PULLED FROM A GENTLY USED SET-UP, A VERY CAPABLE LEAD SCREW ASSEMBLY FROM SANYO DENKI - JAPAN. TESTED AND OPERATIONAL.

IC200UDR010 28 Point Micro PLC, (16) 24VDC In, (1) 24VDC Out, (11) Relay Out, 24VDC PS IC200UDR228 28 Point Micro PLC, (16) 24 VC In, (1) 24VDC Out, (11) Relay Out, 12/24 VDC PS VersaMax Micro PLCs IC200UDR010 and IC200UDR228 accept sixteen DC inputs and provide one DC output and eleven normally-open 2 Amp relay outputs. The only differences between these modules are their power supplies and the output current rating of their Q1 DC output.

AC GearmotorVoltage Rating 105/115 VAC, 1 Phase, 60/50 HzNameplate RPM 43, Full Load Torque (In.-Lbs.) 55.0, Overhung Load (Lb.) 110, Input HP 1/12, Gear Ratio 40:1, Full Load Amps 1.30TENV Enclosure, None Thermal Protection, All Position Mounting, Motor Type Permanent Split Capacitor this gearmotor was a back-up that was never used and is no longer available from grainger. 1 knockout was removed and strain relief connector was installed and then taken out.