5pcs 3.3v To 5v Bi-directional 2 Channel Level Converter Module For Arduino

US $240

Shanghai, China
May 31st

Open on mobile:
QR code

5pcs 3.3V to 5V Bi-directional 2 Channel Level Converter Module for Arduino Description If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side. Two inputs and two outputs are provided for each side. Bread board friendly! Can be used with normal serial, I2C, SPI, and any other digital signal. Does not work with an analog signal. The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'HV' pin, low voltage (2.8V for example) to 'LV', and ground from the system to the 'GND' pin. Pins are labeled as Inputs and Outputs. These are relative to the board. A digital one going into the RXI pin on the 5V side will show up on the RXO pin on the 3.3V side as 3.3V. A digital one going into the TXI pin on the 3.3V side will show up on the TXO pin on the 5V side as 5V. Features: Two channels of high-voltage logic and low-voltage logic bi-directional conversion Two channels of high-voltage logic conventer to a low-voltage logic One-way conversion Compatible with breadboard module ,it can be directly inserted in the breadboard Size:1.5cm X 1.5cm Instructions for use: [For example:High voltage of 5V ,low voltage of 3.3V ] HV connect to 5V power supply LV connect to 3.3V power supply GND connect to negative. RXI input 5v TTL, the RXO output 3.3v TTL TXI input and output 3.3V TTL, TXO inputs and outputs 5V TTL, TXI and TXO bi-directional conversion Package including: 5pcs 3.3V to 5V Bi-directional 2 Channel Converter Module for Arduino Payment We accept Paypal as payment Delivery details Delivery to most of the countries will take 2-4 weeks, if there's no problem when pass through the customs. Please make sure your shipping address is correct.Any non-received items caused by invalid or wrong shipping address are not in our full refund or replacement policy. The extra fee occured when the product pass through the customs should be paid by buyer Terms of sales The default shipping is by China Post air mail/Hongkong air mail to worldwide. We provide you combine shipping by e-Packet Service to USA and only charge you 1.8USD for each order. Item will be shipped within 1-2 working days after your cleared payment.Note:order more than $50, we provide free tracking number, order less than $60, customer need to pay $2 if need tracking number. About us We are a company based in China developing and manufacturing electronic development device , including electronic components ,camera module, camera lens , LCD modules and other development board for Raspberry pi,Arduino and other opensource hardware Platform We can also provide customized design and manufacture services according to your requirements. Contact us If you have any questions, please feel free to leave us ebay message or email us directly! On May-18-16 at 11:23:34 PDT, seller added the following information: