+ Post new Ad
6" Chuck Jaws 1.5 Mm Serations With Tee Nuts And Bolts, US $1500 – Picture 0
6" Chuck Jaws 1.5 Mm Serations With Tee Nuts And Bolts, US $1500 – Picture 1
6" Chuck Jaws 1.5 Mm Serations With Tee Nuts And Bolts, US $1500 – Picture 2
6" Chuck Jaws 1.5 Mm Serations With Tee Nuts And Bolts, US $1500 – Picture 0
6" Chuck Jaws 1.5 Mm Serations With Tee Nuts And Bolts, US $1500 – Picture 1
6" Chuck Jaws 1.5 Mm Serations With Tee Nuts And Bolts, US $1500 – Picture 2

6" Chuck Jaws 1.5 Mm Serations With Tee Nuts And Bolts

US $1500

  • Hopkins, Minnesota, United States
  • Jan 30th
Open on mobile:
QR code
This is a new set of chuck jaws and tee nuts for kitakawa or similar type of chuck. They measure 1 in wide. 1.125 tall and 2.625 long. The bolts are .787 on center (20mm). And the tee nuts are .470 wide at the top where they fit into the jaws. They are new condition, unused but not in original packaging.

Directions

Similar products from Lathe Chucks

8" ( 8 inch) 3 Jaw Self Centering Lathe Chuck (mounting front)

8" ( 8 inch) 3 Jaw Self Centering Lathe Chuck (mounting front)

  • Diamond Bar, California, United States
  • Jan 30th
12" Cushman Lathe Power Chuck 2167012A11B

12" Cushman Lathe Power Chuck 2167012A11B

  • Plainville, Connecticut, United States
  • Jan 30th
Kitagawa B206 drawnut

Kitagawa B206 drawnut

  • Abingdon, Virginia, United States
  • Jan 30th
12" 3 Jaw Power Chuck For CNC Lathe Ser 12-CC-520 In Good Condition!

12" 3 Jaw Power Chuck For CNC Lathe Ser 12-CC-520 In Good Condition!

  • Plainville, Connecticut, United States
  • Jan 30th
Suburban Magnetic Sine Plate- 6"X12"

Suburban Magnetic Sine Plate- 6"X12"

  • Hibbing, Minnesota, United States
  • Jan 30th
12" BUCK 3 JAW SCROLLING LATHE CHUCK - 3" HOLE THRU - D1-8 MOUNT

12" BUCK 3 JAW SCROLLING LATHE CHUCK - 3" HOLE THRU - D1-8 MOUNT

  • San Diego, California, United States
  • Jan 30th
Lathe Chuck Wrench T-Handle 1/2 Inch Square Head-NEW

Lathe Chuck Wrench T-Handle 1/2 Inch Square Head-NEW

  • Chino, California, United States
  • Jan 30th
Backplate/Adapter for 6" 3 or 4 Jaw Lathe Chuck (1-1/2"-8 Thread) No Holes

Backplate/Adapter for 6" 3 or 4 Jaw Lathe Chuck (1-1/2"-8 Thread) No Holes

  • Chino, California, United States
  • Jan 30th
Soft Steel Jaws 4"3pieces/set-1.5 mm x 60 Degree Serrations

Soft Steel Jaws 4"3pieces/set-1.5 mm x 60 Degree Serrations

  • Chino, California, United States
  • Jan 30th
U.S.A.! CUSHMAN 4 JAW INDEPENDENT 12" LATHE CHUCK W/ L00 MOUNT + CHUCK KEY

U.S.A.! CUSHMAN 4 JAW INDEPENDENT 12" LATHE CHUCK W/ L00 MOUNT + CHUCK KEY

  • Chino, California, United States
  • Jan 30th
BUCK FORKARDT 6" SIX JAW SCROLL CHUCK - 1.5" HOLE D1-4 MOUNT - 6AT6 AJUST-TRU

BUCK FORKARDT 6" SIX JAW SCROLL CHUCK - 1.5" HOLE D1-4 MOUNT - 6AT6 AJUST-TRU

  • San Diego, California, United States
  • Jan 30th
U.S.A.! CUSHMAN 3 JAW INDEPENDENT 12" LATHE CHUCK W/ L00 MOUNT + CHUCK KEY

U.S.A.! CUSHMAN 3 JAW INDEPENDENT 12" LATHE CHUCK W/ L00 MOUNT + CHUCK KEY

  • Chino, California, United States
  • Jan 30th
HARDINGE-SJOGREN 3J LATHE SPEED CHUCK NO. 3-D8 D1-8 MOUNT

HARDINGE-SJOGREN 3J LATHE SPEED CHUCK NO. 3-D8 D1-8 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
EXCELLENT!! BUCK 6" 4 JAW LATHE CHUCK W/ 1-1/2"-8 THREAD MOUNT #444

EXCELLENT!! BUCK 6" 4 JAW LATHE CHUCK W/ 1-1/2"-8 THREAD MOUNT #444

  • Chino, California, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Small Armstrong Adjustable Spanner Wrench for Chuck

MACHINIST TOOLS LATHE MILL Small Armstrong Adjustable Spanner Wrench for Chuck

  • Morris Plains, New Jersey, United States
  • Jan 30th
Kitagawa IC-10 Standard 4 Jaw Independent Chuck

Kitagawa IC-10 Standard 4 Jaw Independent Chuck

  • Millstone Township, New Jersey, United States
  • Jan 30th
GUHDO 6375.630.40 CNC Tool Holders 24000 rpm 3-26mm HSK 63F ER 40

GUHDO 6375.630.40 CNC Tool Holders 24000 rpm 3-26mm HSK 63F ER 40

  • Alpharetta, Georgia, United States
  • Jan 30th
Backplate/Adapter 4" Lathe Chuck Cast Iron

Backplate/Adapter 4" Lathe Chuck Cast Iron

  • Warren, Michigan, United States
  • Jan 30th
Set of Hard Top Jaws for 6-1/4" 3-Jaw Scroll Chucks

Set of Hard Top Jaws for 6-1/4" 3-Jaw Scroll Chucks

  • Warren, Michigan, United States
  • Jan 30th
5" 4-JAW SELF-CENTERING LATHE CHUCK with 5C Shank,Extra Jaws - RARE

5" 4-JAW SELF-CENTERING LATHE CHUCK with 5C Shank,Extra Jaws - RARE

  • Clay, New York, United States
  • Jan 30th

People who viewed this item also vieved

Welding Table Top - Used - AM15373

Welding Table Top - Used - AM15373

  • Cleveland, Ohio, United States
  • May 26th
Import Right Angle Iron 5-1/2" x 7" x 10" Semi-Steel Machine 70146063 5Aa*

Import Right Angle Iron 5-1/2" x 7" x 10" Semi-Steel Machine 70146063 5Aa*

  • Saint Louis, Missouri, United States
  • May 26th
Large Horton Angle Sine Plate Table Fixture Tapped Breadboard For Grinder Mill

Large Horton Angle Sine Plate Table Fixture Tapped Breadboard For Grinder Mill

  • Minnetonka, Minnesota, United States
  • May 26th
RARE (7) WELDON WTH #9 Taper Brown and Sharpe B&S #9 Taper End Mill Holders

RARE (7) WELDON WTH #9 Taper Brown and Sharpe B&S #9 Taper End Mill Holders

  • Hopkins, Minnesota, United States
  • May 27th
Pratt Whitney, R-6, R-8, Grinder, Collet, P&W Collet, Various Sizes Available

Pratt Whitney, R-6, R-8, Grinder, Collet, P&W Collet, Various Sizes Available

  • Greene, Rhode Island, United States
  • May 27th
NICE DUNHAM 5C EXPANDING MANDREL 1-7/8" X 1"

NICE DUNHAM 5C EXPANDING MANDREL 1-7/8" X 1"

  • Ellington, New York, United States
  • May 27th
Cleco clamps. New 20pc. Aircraft sheetmetal.

Cleco clamps. New 20pc. Aircraft sheetmetal.

  • Goddard, Kansas, United States
  • May 28th
20cleco clamps. New/used. Aircraft sheetmetal.

20cleco clamps. New/used. Aircraft sheetmetal.

  • Goddard, Kansas, United States
  • May 28th
MACHINIST TOOLS LATHE MILL Machinist Lot of Smalll Set Up Clamps for Hold Down

MACHINIST TOOLS LATHE MILL Machinist Lot of Smalll Set Up Clamps for Hold Down

  • Morris Plains, New Jersey, United States
  • May 28th
15/16"-20 Threaded Center Insert, 1-1/16" Diameter

15/16"-20 Threaded Center Insert, 1-1/16" Diameter

  • Lebanon, Tennessee, United States
  • May 29th
live center no. 6 -40 ready tool #11 brown and sharp shank x

live center no. 6 -40 ready tool #11 brown and sharp shank x

  • Plantsville, Connecticut, United States
  • May 29th
5MT LATHE DEAD CENTER STK 9015

5MT LATHE DEAD CENTER STK 9015

  • Wadley, Alabama, United States
  • May 29th
Urko 14" quick-adjust I-beam mechanics vise from Spain wilton columbia reed

Urko 14" quick-adjust I-beam mechanics vise from Spain wilton columbia reed

  • Los Angeles, California, United States
  • May 30th
DAWN CROSS SLIDE VICE TABLE STANDARD SWIVEL BASE 62174

DAWN CROSS SLIDE VICE TABLE STANDARD SWIVEL BASE 62174

  • Arncliffe, NSW, Australia
  • May 30th
Milling machine, shaper vise handle

Milling machine, shaper vise handle

  • Camarillo, California, United States
  • May 30th
MACHINE SHOP TOOLING KENNAMETAL SHIMS # SM 386 SET OF 5

MACHINE SHOP TOOLING KENNAMETAL SHIMS # SM 386 SET OF 5

  • Cedar, Minnesota, United States
  • Jun 6th
MACHINE SHOP TOOLING CARBIDE INSERTS # DNGA-543H N52 SET OF 26

MACHINE SHOP TOOLING CARBIDE INSERTS # DNGA-543H N52 SET OF 26

  • Cedar, Minnesota, United States
  • Jun 6th
18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1988

18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1988

  • Grand Rapids, Michigan, United States
  • Jun 6th
42" CNC Rotary Table 4' Diameter Precision Motorized Servo Motor Index

42" CNC Rotary Table 4' Diameter Precision Motorized Servo Motor Index

  • Grand Rapids, Michigan, United States
  • Jun 9th
6" Super Indexing Spacer with 6" Adjustable Chuck 0.0005" TIR,#SS-600- NEW

6" Super Indexing Spacer with 6" Adjustable Chuck 0.0005" TIR,#SS-600- NEW

  • Fort Worth, Texas, United States
  • Jun 9th
V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W n

V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W n

  • Gilbert, Arizona, United States
  • Jun 9th
V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W

V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W

  • Gilbert, Arizona, United States
  • Jun 9th
V Block, Machinist V Block Made by Toolmaker 2 bs 10 oz 2.5 in L x 2 H x 2.75 W

V Block, Machinist V Block Made by Toolmaker 2 bs 10 oz 2.5 in L x 2 H x 2.75 W

  • Gilbert, Arizona, United States
  • Jun 9th
Used Haas TR-160 Trunnion CNC Brushless Rotary Table Indexer Full 4th 5th Axis

Used Haas TR-160 Trunnion CNC Brushless Rotary Table Indexer Full 4th 5th Axis

  • Schaumburg, Illinois, United States
  • Jun 9th
"Ultra Pro II Seam Ripper & Buttonhole Cutter-5.5"""

"Ultra Pro II Seam Ripper & Buttonhole Cutter-5.5"""

  • Hickory Hills, Illinois, United States
  • Jun 13th
"Penny Black Cling Stamp 5""X7""-Tree Chirps"

"Penny Black Cling Stamp 5""X7""-Tree Chirps"

  • Hickory Hills, Illinois, United States
  • Jun 13th
Liquitex Basics Acrylic Paint 250ml-Phthalocyanine Blue

Liquitex Basics Acrylic Paint 250ml-Phthalocyanine Blue

  • Hickory Hills, Illinois, United States
  • Jun 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies