6 exhaust pipe for sale, brand-new and used.

This is a New Replacement Ball Muffler For the Later Waterloo & Waterloo Contract Hit & Miss Gas Engines, All The Small H & K Waterloo Boy 1 1/2 1 3/4 with the 3/4" exhaust Used these Mufflers, As it shows them in the Sales books.....

This is a New Replacement Ball Muffler For Any Engine That Uses A 1 1/4" Pipe thread For the exhaust, It is Like Many Of The Mufflers That Were Made back Then & was used On Many Brands & Models Of Hit & Miss Gas Engines. This Is Bolted Together Like the Originals Were With 5/16" Square Nuts & Bolts, They were used On The Galloway, Associated, United, Witte, Amanco, 6 Hp John Deere, & Many Others, Basically anything with 1 1/4" Pipe thread Or Whatever You Can Adapt it to !!!!

This is a New Replacement Ball Muffler For Any Engine That Uses A 1 1/4" Pipe thread For the exhaust It is Like Many Of The Mufflers That Was Made back Then, But They Are Very Similar The Early Waterloo & Waterloo Contract Hit & Miss Gas Engines I would Say Before About 1910 Or 1911 ......

Baomain 4V210-08 DC 12V Quintuple Solenoid Valve 6mm Connectors Silencers Base Set Product Name : Solenoid Valve Set Valve Model : 4V210-08 Working Pressure : 0.15-0.8MPa Voltage Range : DC 12V Working Voltage : AC 187-253V Position & Way Number : 2 Position 5 Way Joint Pipe Point : Inlet=Outlet=1/2";Exhaust=1/5" : Exhaust=1/5" Base Size : 13.5 x 5.9 x 2.3cm/ 5.3" x

Baomain DC 12V 2 Positions Twin Solenoid Valve Base Muffler Quick Fittings Set Product Name : Solenoid Valve Set Model : 4V210-08 Working Pressure : 0.15~0.8Mpa Working Voltage : DC 12V Working Power & Current : 3W 29mA Position & Way Number : 2 Position 5 Way Joint Pipe Point : Inlet=Outlet=1/2";Exhaust=1/5" : Exhaust=1/5" Base Size : 6.7 x 5.9 x 2.3cm/ 2.6" x 2.3" x 0.9"(LW*T)

4 way, 5 port Solenoid Valve. Perfect for Halloween air pneumatic props, also comes speed control fittings and 3 feet of push connect air line. Speed contr

 

This is an Original Muffler, Exhaust Hose & Engine Coupler For The Briggs & Stratton W Series Of Engines. Like W WM WMB WI This May fit different models Or Brands Of Engines, But Are commonly seen on the Briggs & Stratton WMB Wash Machine Engines, But would look good On any Engine That Uses A 1/2" Pipe thread for the exhaust Like Johnson Iron Horse And A few other Small Gas Engines. This Is Actually Two Halves of A Muffler Pipe That I Have Collected Up...

This is a Rusty Ball Muffler For the Later Waterloo & Waterloo Contract Hit & Miss Gas Engines, All The Small H & K Waterloo Boy 1 1/2 1 3/4 with the 3/4" exhaust Used these Mufflers, As it shows them in the Sales books..... Fits: 1 1/2 1 3/4 & 2 Hp Sizes.. With 3/4" Exhaust Pipe I would say that if you Have any Waterloo Or Waterloo Contract Engine, That Uses A 3/4 Pipe thread this would be the correct style muffler for your Engine This is 6 1/2" In Dia

Ultra-High Temperature Soldering, Brazing & Insulating Blanket These ceramic-based insulating barrier sheets protect surrounding plastic piping, wood framing and electrical wiring when sweating copper tubing and fittings in confined spaces. Its perfect size is great for small plumbing jobs around the house to prevent surface heat damage.

International buyers must pay their own local duties. We do not mark international parcels as gift. IF YOU HAVE QUESTIONS CALL 1-800-748-1945

Oval Gas Vent Collection Aluminum 12" Length Oval Rigid Pipe with 4" Inner Diameter This Aluminum 12" Length Oval Rigid Pipe with 4" Inner Diameter from the Oval Gas Vent is a Type B gas component that will meet the needs of any Type B installation. Use for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specifically tested and listed to use Type B Gas Vent.

This Is an Exact Replica Ball Muffler For the 1 1/2 1 3/4 & 2 Hp Hercules, Economy, & Jaeger Hit & Miss Or Throttle Governed Gas Engines Using A 1" Pipe Thread For the Exhaust. This is 7" In Dia ..... 5 1/2 " tall 1 " Pipe thread......

This Is a Ball Muffler For the 1 & 1 1/2 Hp Hit & Miss Gas Engines Using A 1" Pipe Thread For the Exhaust. This is very similar to the Ball Mufflers that were used on the various Early Hit & Miss Gas Engines Like Sparta Economy Waterloo Galloway Associated Etc.. This is 7" In Dia .....

New 9-50V 40A DC Motor Speed Control PWM HHO RC Controller 12V 24V 48V 2000W MAX Condition New

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Baomain DC 12V 2 Positions 5 Ways Electric Solenoid Valve 4V210-08 Product Name : Solenoid Valve Model : 4V210-08 Working Pressure : 0.15~0.8Mpa Operating Temperature : 35A°C Power Consumption : DC 12V, 3W Current : 125mA P