600v power supply for sale, brand-new and used.

1. Introduction Safe and Time Saving Traditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while ETCR1000D uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clamping the three-ph

1. Introduction Safe and Time Saving Traditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while ETCR1000C uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clampi

Product Description Velleman LAB1U 3-in-1 Lab Unit

This is a TDK LAMBDA GENESYS Power Supply P/N: 005071005. This unit appears unused and is guaranteed not DOA. The following information is taken from the manufacturers website.

DP6000 Series High Voltage Differential Probes for measurement of high-voltage differential signal, to meet the demand for floating measurements. This series has a very high bandwidth to meet the needs of the majority of the test system; This series has a rich range.

CP8300A The CP8000A series uses a combination of Hall effect and transformer technology which enables measurements to be made on DC, AC and impulse currents. It’s key features include highly accurate current measurements?wide bandwidth?easy current measurements?DC/AC measure?over-current protected and indication(buzzer and LED indicator)?double ranges selection?low current measurements?degauss and auto zero function.

THIS SALE IS FOR A MITSUBISHI SPINDLE DRIVE UNIT, TAKEN FROM A MAZAK V15. UNIT WAS IN REBUILT CONDITION WHEN REMOVED WITH LESS THAN 500 HRS USE. MODEL NUMBER FR-SD-2-11K .

Hypertherm Powermax 85 Plasma Cutting System with 25' hand torch P/N 087108 Hypertherm factory refurbished Powermax 85 plasma cutting system in near new condition - comes with Hypertherm 3 year warranty on the power source. Exactly the same machine as new models - cuts up to 1.25" thick material at 10 inches per minute. Operates on 200 to 480/600v single or 3phase 50/60hz power - certified to CSA standards.

Here's the description: HYPERTHERM POWERMAX 65 W/25FT LEAD COMES COMPLETE AND IN ORIIGINAL BOX  Includes: Power Supply  25 ft. H65 Hand Torch  25 ft.

Here's the description: hypertherm powermac 85 25ft lead new in box Includes: Power Supply 25 ft. H85 Hand Torch 25 ft. Work Cable More productivity with lower operating cost – faster cut speed, improved cut quality, and longer consumable life deliver more performance with less cost.

Ebay Template CUSTOMER SERVIC

CP8150A The CP8000A series uses a combination of Hall effect and transformer technology which enables measurements to be made on DC, AC and impulse currents. It’s key features include highly accurate current measurements?wide bandwidth?easy current measurements?DC/AC measure?over-current protected and indication(buzzer and LED indicator)?double ranges selection?low current measurements?degauss and auto zero function.

-- Feature and Merit -- * The measurement based on IEC61000-4-15 by using a flicker sensor (option) is possible. Measurement of "the short flicker value Pst (for 10 minutes)" and the "prolonged flicker value Plt (2 hours)" can be performed. * 12 kinds of power

This is a Kikusui PAN600-2A High Performance DC Power Supply. This supply is capable of 0-600V, 0-2A operation up to 1000W. The PAN-A Series is a high-performance, highly reliable DC power supply unit featuring regulated variable voltage.

Used power supply unit, has been powered on seems operational have not thoroughl

Appleton AEP10463 100 amps 4 pole Appleton AEP10463 4 Pole 3 Wire Clamping Ring Plug; 100 Amp, 600 Volt AC/ 250 Volt DC PRODUCT DETAILS • Plug with clamp ring has neoprene gasket. Ring threads onto screw cap receptacle to provide raintight assembly when properly tightened Appleton AE Series Wire clamping ring plug in natural finish has neoprene gasket/copper-free aluminum housing. Ring threads onto screw cap receptacle to provide raintight seal when properly fixed.