7500 / 4 for sale, brand-new and used.

Silver/Deming Drill, Reduced Shank, General Purpose Grade, High Speed Steel, Black Oxide Finish, Conventional Point, Drill Point 118 Deg, Fractional Size 3/4 In, Decimal Equivalent 0.7500, Flute Length 3 1/8 In, Overall Length 6 In, Shank Type Round, Shank Dia 1/2 In General Purpose Silver and Deming HSS Drills, 118 Run drill sizes up to 1-1/2" on portable electric drills or drill presses. Minimal adjustment needed during tool changes. No need for tool presetting

You are bidding on ( 1 ) new Cleveland C24171, Series 2635, 3/4", 90 degree, HSS Spotting Drill P/N C24171 Size - 3/4" / 0.7500" / 19.05mm Shank Dia. - 3/4" Flute Length - 1 3/4" OAL - 5" No. of Flutes - 2 Point ANgle - 90 degree Material - HSS Finish / Coating - Bright Made in USA FREE SHIPPING in the USA only.

You are bidding on ( 1 ) new Extra Length Drill Bit, 3/4" x 12", HSS, 118 degree Size - 3/4" / 0.7500" Shank Dia. - 3/4" Flute Length - 9" OAL - 12" Point Angle - 118 degree Material - HSS Coating - Black Oxide Made in China FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping.

You are bidding on ( 1 ) new Cleveland, C04640TiN, 3/4", HSS, TiN, Screw Machine Length Drill Bit P/N C04640TiN Size - 3/4" / 0.7500" Shank Dia. - 3/4" FLute Length - 3 1/8" OAL - 5" Point Angle - 118 degree Material - HSS Finish / Coating - TiN Made in USA FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping.

New in case Hertel - Jobber Length Drill Bit-Size 1/2" Features and Benefits: • Bright provides a smooth, polished finish on the tool. It increases chip flow in softer materials such as aluminum, wood and plastic. • Solid carbide provides better rigidity than high speed steel.

USED BUT SHOW LITTLE SIGNS OF WEAR (SEE PHOTOS). CAN BE USED AS IS OR REGROUND TO SAVE MONEY. Jobber Length Drill Bits; Drill Bit Size (Inch): 3/8; Drill Bit Size (Decimal Inch): 0.3750; Drill Bit Finish/Coating: Bright; Drill Bit Material: Solid Carbide; Flute Length (Inch): 2-3/4; Flute Length (Decimal Inch): 2.7500 Drill Bit Size (Inch) 3/8 Drill Bit Size (Decimal Inch) 0.3750 Drill Bit Finish/Coating Bright

BRAND NEW

You are bidding on ( 1 ) new Republic Drill 215-3/4, 3/4", HSS, Extra Length Straight Shank Drill Bit P/N 215-3/4 Size - 3/4" / 0.7500" Shank Dia - 3/4" Flute Length - 11" OAL - 15" Point Angle - 118 degree Material - HSS Finish / Coating - Bright Made in USA Shipping will be USPS Priority Mail for 2 lbs. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details.

You are bidding on ( 1 ) new Hannibal Carbide Tool, 6XX48, 3/4", #3MT, Carbide Tipped, Taper Shank Drill Bit P/N 6XX48 Size - 3/4" / 0.7500" Shank Taper - 3MT Flute Length - 5 7/8" OAL - 9 3/4" Point Angle - 118 degree Material - Carbide Tipped Finish / Coating -- Uncoated Made in USA FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details.

Dormer A345 High Speed Steel Taper Shank Drill Bit, Extra Length, Black Oxide Finish, #2 Morse Taper Shank, 118 Degree Thinned Web Point, 3/4" Product Specifications

Here we have 2 (TWO) New Large RTW Carbide Mills. They measure .7500 X 4"" and have a .750 shank. I have more of these, including other sizes of large Carbide mills listed.

Here we have a New Large RTW Carbide Mill. They measure .7500 X 4"" and have a .750 shank. I have more of these, including other sizes of large Carbide mills listed.

BRANDNEW UNUSED ROUGHING ENDMILL MANUFACTURER: YG MATERIAL: TANK POWER ASP POWDERED METAL DIAMETER: 3/4" ( .7500" ) LENGTH OF CUT: 1 5/8" OVER ALL LENGTH: 3 7/8" FLUTES: 4 / TIALN FUTURA COATED SHARP CORNER: YES CENTER CUTTING: YES WELDON FLAT: YES FREE SHIPPING CONTINENTAL USA INTERNATIONAL BUYERS WELCOME THRU EBAY GLOBAL SHIPPING WE DO OFFER A FULL AND PROMPT 14 FULL MONEY BACK GUARANTEE

End Mill, Standard, General Purpose, Number of Flutes 4, Single End, Ball Nose End Style, Center Cutting Type, Right Hand Cut, Carbide, Bright Finish, Dia 3/4 In, Shank Dia 3/4 In, Length of Cut 1 1/2 In, Overall Length 4 In, Rhc 30 Deg, Rhh 30 Deg, For Aluminum, Carbon And Tool Steel, Cast Iron And 300 Or 400 Series Stainless Steel Granger Item # - 2TXU7 Reg. Price - $238.50 Brand - OSG Mfr. Model # - 404-7500-BN

SGS SER 1 3/4 END MILL WF .7500 USA 30182 NEW 

ACC-12 3/8X3/8 List Style:435 Construction:General Purpose Finisher Material:High Speed Steel Shank:Straight w/ Weldon Flats Hand of Spiral Cut:RHS / RHC Center Cutting:Yes Double Ended:Yes End Style:Square Number of Flutes:4 Surface Condition:Bright Diameter Fractional:3/8" Decimal Equivalent:0.3750" / 9.53mm Shank Diameter:0.3750" / 9.52mm Length of Cut:0.7500" / 19.05mm Overall Length:3.5000" / 88.90mm FREE SHIPPING

BRANDNEW UNUSED ROUGHING ENDMILL MANUFACTURER: NIAGARA MATERIAL: COBALT / M42 DIAMETER: .7500" LENGTH OF CUT: 1 5/8" OVER ALL LENGTH: 3 7/8" FLUTES: 4 SHARP CORNER: YES CENTER CUTTING: NO WELDON FLAT: YES COATING: TIN FREE SHIPPING CONTINENTAL USA INTERNATIONAL BUYERS WELCOME THRU EBAY GLOBAL SHIPPING WE DO OFFER A FULL AND PROMPT 14 FULL MONEY BACK GUARANTEE

include("http://