8 inch flange for sale, brand-new and used.

Allied Machine and Engineering 22025S-125L

Ecolab / Ace Pump Corp water pump model ECL-10, ECL-9, serial number 36557. Outlet measures 1 1/8 inches to the inside of the threads, inlet measures 1 1/2 inches to the inside of the thread -- I'm not sure if this is the right way to measure it, but I think you can figure it out. Shaft size is 5/8 of an inch and the flange bolt holes measure 4 1/8 inches center to center, in both directions.

You are looking at a brand new 10 inch ID stainless steel bellow, 16 inch long. On one side you have a 14 inch diameter flange with four 3/8" holes with a 12 1/2" across bolt pattern. On the other side you have two 5/8" holes 15 1/2" apart.

This is unused with no box and no instructions, It appears to be 316 stainless with Tefzel lining. 1/2 inch flange fittings. The manufacturers page is here: Bin 20 http://www.brooksinstrument.com/downloads/Product%20Documentation/Variable%20Area%20Meters%20Armored%20Rotameters/Data%20Sheets/ds-va-mt3809-3819-eng.pdf See the item photos above for the actual contents of the auction and the exact condition of the item elements.

ERI 6 1/8" MACX LINE 90 deg ELBOW SECTION. New old stock. Still has factory covers sealed on the unit, but is sold in "as is" condition.

Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM.

This is used and in good condition. It has two ports. Both of the ports are for 1 1/2 inch tube with Varian six bolt CF flanges.

SIDE MOUNT FLANGE SPEED REDUCER, PAPER CONVERTING MACHINE COMPANY PART #3984 RATIO, 5:1 INPUT HP, 2.32 @1750 RPM OUTPUT TORQUE INCH POUNDS, 371 INPUT MOTOR DIMENSIONS, FLANGE IS 4 1/8" SQUARE WITH 4 THREADED BOLT HOLES 3 1/4" CENTER TO CENTER, THE PILOT BORE IS ABOUT 3 3/4" AND THE BORE FOR THE MOTOR SHAFT IS 19 MM HOLLOW OUTPUT, 30 MM THIS SPEED REDUCER HAS NOT BEEN USED.

Brand New Sony CyberShot 8 MP Di

BUCK CHUCK Lathe Chuck Adapter Plate Chuck Diameter Compatibility (Inch) 8 Nominal Chuck Size

This is a new lens kit for the Whelen Liberty Lightbar system. Designed to be used on 48.5 - 49 inch frames. Includes four (4) long sections, four (4) short sections, six (6) dividers, eight (8) screws and two new silicone flange endc

[ Dayton 24 In Blade Dia Belt Drive Steel Tubeaxial Fan

Welcome to WoolyWorth The Five & Dime Store Est 2014

0 Minimum Drill Diameter (Inch) 33/64 Maximum Drill Diameter (Inch) 11/16 Spade Drill Length