Used Jard control transformers (2)---Input voltage can be 120v or 240v AC. Secondary voltage is either 12v or 24v AC. Input terminals are common, 120v and 240v.
Power voltage transformer, regulating, and harmonic neutralizing. Input 90-130 vac or 130-260 vac. 60 cycle, single phase...gives 118vac,plus or minus 1% and1.02amps.
This item is: This item is uunused but had a few drops of moisure on it which cause some light surface rust in a few spots. Unit will work just fine. Two of the feet are slightly bent from handling.
The ISO-PUCK transformers are certified to UL60601-1 and CSA STD c22.2 No. 601.1 and are intended for 60 Hz operation only. The transformers are available in three power ranges of 300 VA, 600 VA and 1000 VA for a 117 V/60 Hz line frequency; 240 V/60 Hz is optional.
Power Transformer, Step-Down, Multi-Taps, Mil. Spec. Brand new, step-down, multi-tap power transformer meets Military Specification MIL-T-27, type designation TF5503ZZ.
Vintage TA89-127/220-50 Transformer NEW in a box Tension on branches of primary windings of TA89 transformer for 127/220 V, 50Hz *between conclusions 1 and 2, 6 and 7 - 110 V; *between conclusions 2 and 3, 7 and 8 - 10 V; *between conclusions 3 and 4, 8 and 9 - 7 V; *between conclusions 4 and 5, 9 a
Signal Transformer 36-4 115V TO 18/36 VAC 8/4 AMP Has general signs of normal wear and tear which may include scratches, scuffs, dirt, sticker residue etc on the exterior casing. NOTE: This item can only be shipped to a U.S. destination.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.