agitator mixer for sale, brand-new and used.

Arrow Engineering Co., Inc. Pneumatic Mixer/Air Stirrer Shaft Mount. 3/8" shaft.

USED 2000gallon Paul Mueller Model "F" 316SS Reactor w/ 5-zone Half Pipe Jacket, 50HP/30RPM Lightnin Drive, 3-hub turbine agitator. Reactor VesselCapacity - 2000galNational Board Number - 12318Vessel MAWP Pressure - 50psig/Full Vacuum @ 450°FSerial Number - P20623Yr Built - 1987Materials of Construction - 316SSAgitator - 3-hub turbine agitator w/ bottom hub supportBaffles - 3 internal heavy-duty baffles

Tank has been lightly used and is around 2 years old, its in excellent condition. Used in food grade application. It has a jacket on it and also has an integrated mixer.

Jacketed Stainless Steel Kettle With Side Scrapper Agitator/Mixer 1127 Gallon Carmel Group inc. Tel # (514)270-5377 Contact: R

For sale is a Gemco double cone stainless steel lab blender with digital timers and digital speed agitator. Specifications: Max Den.LB/CF 250, electricals 115v/1ph/60hz, Agitator speed 2950 rpm +/- 5, Vessel speed 23.5 rpm +/- 3%. As is.

ITEM #: 12952 USED 3HP SPX LIGHTNIN MIXER AGITATOR DRIVE 71-0-2CONTACT US FOR MORE INFORMATION.

ITEM #: 12951 USED 3HP SPX LIGHTNIN MIXER AGITATOR DRIVE 71-0-1CONTACT US FOR MORE INFORMATION.

500 gallon Mueller milk tank. Very good used condition, clean inside and out, with agitator. I can be reached by phone at 417-299-2476 with any questions or offers you have on the tank.

This 5HP Chemineer dual blade mixer (agitator) is a model 16TNC-5. It is less the 5hp 1800 RPM top-mounted motor. Output RPM is 155-31.

This single wall tank measures 96" on the straight side plus each dished end adds 12". The tank diameter is 6'. Mounted on the bottom side of the non-discharge end is a 2hp horizontally oriented Lightin Mixer which is 230/460V 3ph, which motor turns at 1160 rpms.

Hockmeyer HMR.25 Barrel 55 gallon Drum Drop in Mixer Agitator lifts in and out. 30 HP HOCKMEYER model HVR.25 Disperser. Motor is 30 HP, 200/230/460 volt, 1770 RPM, XP vari-speed motor.

(one) 3 blade mixing impeller , prop type , 10" diameter , cast stainless steel , 1 1/4 " x 1 1/2 " long bore , with set screw . $10 shipping in the continental U.S. You can send text messages to my cellphone at 9374165497@vtext.com D-12041 If you have any questions, please email me!

(one) Cast stainless steel prop type mixer impeller , 16" diameter , 3 blade , 1 3/16" x 3 1/4 " bore , 1/4 " keyway . $20 shipping in the continental U.S. You can send text messages to my cellphone at 9374165497@vtext.com D-12038 If you have any questions, please email me!

(one) Mixer , agitator , Chemineer , model 2BTNS-1 , Bio-Tech , 1hp , 230/460 vac , 1725 rpm with Hub City gear reducer and Reliance 0-240hz variable frequency drive , 350 rpm base speed . SP500 easy clean plus . Flowserve VRA dura seal , 316SS , Viton Packing .

400 Gallon Jacketed Carbon Steel Tank with Coned Bottom Dimensions : 48" dia x 42" Sidewall + Coned Bottom Jacketed side - Atmospheric type Open Top - NO LID 22" Legs Carbon Steel construction Coned bottom Mounting bracket for mixer / agitator 1.5" NPT Center discharge 13" from discharge outlet to floor Last used in a PAINT MFG Facility Good Condition !! For More

(one) chemical slurry mixing blending pump transfer skid, includes slant bottom intake hopper, 30" x 28" x 36" deep with 12" opening at top, Effector high and low limit proximity sensors, hopper bottom electric vibrator, 9’ long x 4" diameter auger screw feeder that dumps into a 16" x 18" x 50" high pre-mix tank compartment with Mamec Oy mixer agitator, model HDS 5.5/1000, 6.5 KW, 1150 rpm, 440/480 vac, direct drive with dual stagger tooth impellers.