agitator shaft for sale, brand-new and used.

Click Image To View Full Size

Chemineer Xpress Portable Mixer/Agitator 40XPC-0.5 - New Agitator, Chemineer 40XPC-0.5, @ 350, includes 0.5 hp, single phase, 60 Hz, 115/230 volt, 1750 RPM motor with 40XPC gearbox to reduce the agitator speed to 350 rpm; clamp mounted with 38" long, one 13.5" diameter, 316 s/s, JF-3 impeller. Instruction Manual included. *Needs the 1" diameter, 316 s/s shaft, but this can be bought just about anywhere.

Agitator Shaft and hydrofoil turbine for lightnin or other agitators. This listing is for a shaft and turbine the shaft is 3" diameter 316 SS construction with a single 42" three blade hydrofoil turbine propeller. Please see our other listings for mixers, agitators and gear drives from 10 hp up to 500 hp.

This 5HP Chemineer dual blade mixer (agitator) is a model 16TNC-5. It is less the 5hp 1800 RPM top-mounted motor. Output RPM is 155-31.

Ribbon agitator with 2 inch shaft. It has 2 pillow block bearings towards the top end of the shaft. The ribboned portion is 1 foot diameter by 20 inches tall.

Agitator, Chemineer 40XPC-0.5, @ 350, includes 0.5 hp, single phase, 60 Hz, 115/230 volt, 1750 RPM motor with 40XPC gearbox to reduce the agitator speed to 350 rpm; clamp mounted with 38" long, 1" diameter, 316 s/s shaft; one 13.5" diameter, 316 s/s, JF-3 impeller

Hobart Legacy HL1400 Mixer *** Please contact seller for a freight quote based on your location *** (quoted from manufacturer's description - see images for further details) STANDARD FEATURES ? Heavy-Duty 5 H.P. Motor ?

(one) Mixer , agitator , Chemineer , model 2BTNS-1 , Bio-Tech , 1hp , 230/460 vac , 1725 rpm with Hub City gear reducer and Reliance 0-240hz variable frequency drive , 350 rpm base speed . SP500 easy clean plus . Flowserve VRA dura seal , 316SS , Viton Packing .

Shaft sleeve titanium for PTEM 26 Philadelphia Mixers Unused This is an unused shaft sleeve made by Philadelphia Mixers for a PTEM-26 mixer/agitator. Titanium Bore: 6 7/16 inches Length through bore: 4.51 inches Stamped in top edge: 818807 Specifications: MFG: Philadelphia Mixers Model: 114 Serial: Volts: Amps: Phase: Dr

MIXER MODEL WMP-SB-90W-MS Single bearing design with 50psig mechanical seal. 2" TC Tri Clamp connection. 316ss bearing housing.

MIXER MODEL WMP-SB-90W-MS Single bearing design with 50psig mechanical seal. 2" TC Tri Clamp connection. 316ss bearing housing.

Very good and, extremely heavy built, Hayes & Stolz horizontal mixer, blender, agitator or lump breaker Model SHR86-0809, Serial #1886401 Top opening 46 inches X 92 inches and 32 inches deep and 42 inches high without legs Some surface rust but overall very good condition We have fabricated removable forklift pockets and bolted them to the top of mixer for ease of moving.

This single wall tank measures 96" on the straight side plus each dished end adds 12". The tank diameter is 6'. Mounted on the bottom side of the non-discharge end is a 2hp horizontally oriented Lightin Mixer which is 230/460V 3ph, which motor turns at 1160 rpms.

Hockmeyer HMR.25 Barrel 55 gallon Drum Drop in Mixer Agitator lifts in and out. 30 HP HOCKMEYER model HVR.25 Disperser. Motor is 30 HP, 200/230/460 volt, 1770 RPM, XP vari-speed motor.

"Groen 60 gallon steam kettle" Atlantic Equipment Inc. Serving Light, Medium & Heavy Industry (845 807 8727) Unit number one Serial 808022 Model 1900 built January 1999 Unit is mounted on a tall column. Unit has a capacitive switch Appears complete ( Motors, encoder, agitator, funnel,shaft and Etc.

Graco Lightnin Mixer Motor 3 phase inverter motor Tested and in working condition Looks to have had little use Comes with drive shaft but no mixer blade Drive shaft has scar on end but is useable Ships USA only I might ship drive shaft in separate box

These are the perfect sized mixers for 2,000 gallons up to 4,000 gallon tanks. The sealed design maintains the integrity of your process tank. Heavy Duty 2hp motors.

Stainless Steel Agitator. 6'2" in length. 2" shaft.

Stainless Steel Bladed Agitator. 9'6" in length. 2" shaft.