aluminum bushing for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

Up for Bid is a LOT of 10 ROGAN KNOBS: Gloss Black Knob With Skirt and white Arrow pointer Bushing Shaft Hole is .250" (1/4") Two Socket Set Screw Holes Aluminum Inlay Rogan part # RB67-1SK-7M-1/4" New Old Stock Quantity 10 knobs Ruler not included, shown for size only. ------------>Ships in USA only via USPS <-------------

CLAROSTAT 600 Ohm Potentiometer Linear - NOS Single Turn

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE) SPECTROL MINIATURE POTENTIOMETER MFGR: ETI BUSHING MOUNT 10-TURN POT MODEL: MW10-10B WIRE WOUND RESISTANCE: 1K (1,000) OHMS TOL: 3% res., 0.25% lin. WATTAGE: 1 WATTS TURNS: 10 TURNS Anodized aluminum housing

THIS ITEM IS FOR 1 (ONE) PRECISION POTENTIOMETER AS FOLLOWS: VALUE: 10K (10000) OHM 10-TURNS TOL: +/- 5% LIN: +/- 0.5% RATED: 2 WATTS (I think) MADE BY: SPECTROL ELECTRONICS in the USA MODEL: 500-1151 PANEL MOUNT, LOCKING, SCREW DRIVER ADJUST DIM: 7/8" OD X 1 1/2" L BUSHING: 1/2"L made of aluminum. (could b

template_preview 2Pcs SCS10UU LM10UU 10mm Linear Motion Ball Bearing Slide Unit Bushing New S7

template_preview 2Pcs SCS8UU LM8UU 8mm Linear Motion Ball Bearing Slide Unit Bushing 90014048 S7

Timing Belt Pulleys 18MP012-6FA2 18GR 080P 1/8 1/4B MXL Product Number 18MP012-6FA2 Teeth 18 Tooth Style (MXL) 0.080 pitch Type 6F Bore Type Finished Bore Pitch Diameter 0.458 Outside Diameter 0.438

ebay

This style of flasher has an unusual and interesting type of motor with a large aluminum disc; I don't know exactly how it works...anyway the shaft on this disc (or the bushing it rides in) is worn out and if the unit is not set upright or on its back it might stop running. Offered for parts or studying/monkeying with.

Please Read the Whole Ad! You will only receive what you see in the ad unless otherwise stated.

ACE 21132 ALUMINUM OXIDE GRINDING WHEEL 6" X 1" X 1" 80 GRIT - FINE FOR USE ON BENCH TOP GRINDERS. INCLUDED ADJUSTABLE BUSHINGS TO FIT" 1", 3/4", 5/8" & 1/2" SHAFTS. THIS GRINDING WHEEL HAS SAT ON THE SHELF FOR YEARS, BUT HAS NEVER BEEN USED.

ACE 21134 ALUMINUM OXIDE GRINDING WHEEL 6" X 1" X 1" 36 GRIT - COARSE FOR USE ON BENCH TOP GRINDERS. INCLUDED ADJUSTABLE BUSHINGS TO FIT" 1", 3/4", 5/8" & 1/2" SHAFTS. THIS GRINDING WHEEL HAS SAT ON THE SHELF FOR YEARS, BUT HAS NEVER BEEN USED.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

Reducing Bushing, Haz, Alum, 3/4 to 1/2In Model: RB75-50A Made in: Mexico Manufacturer: Appleton Electric