arbor spacers for sale, brand-new and used.

start_elivehelp_btncodeend_elivehelp_btncode You are buying a lot of 65 arbor spacer rings with keyway. 2 3/4" x 1/4"

NEW Deluxe Set of Arbors ALL New. USA This is an six piece set. Many hours of time to make such a set.

TTC Precision Milling Machine Arbors 30-40-50 Taper - Length Of Shoulder To Nut: 30" Arbor: 51-1/2 - B30-5 51-1/2B30-5 MILLING MACHINE ARBOR - TTC National Standard 30-40-50 Tapers

TTC Precision Milling Machine Arbors 30-40-50 Taper - Length Of Shoulder To Nut: 16" Arbor: 41-1/4 - 16-3 41-1/4A16-3 MILLING MACHINE ARBOR - TTC National Standard 30-40-50 Tapers Features

40 Taper 1" milling machine arbor. 5/8" - 11 thread in taper. The 1" ground diameter and keyway is 12" long.

This is a very nice Dake 001 arbor press. It is set up with stops and spacers that were used for riveting but those parts can be removed and reused as necessary. Very good used condition with no breaks cracks or repairs and the ram runs smootly.

This is a nice stub arbor for 1" bore cutters and it has a #4 morse taper. It comes with spacers and it is keyed. It is 7 1/8" long and the cutter shank is 1 1/4".

used Cincinnati NMTB50 arbor for horizontal milling arbor 1'' dia. 31'' overall length. 12 spacers and jam nut included plus the cutting bit.

Genuine Cincinnati Model 4079 #50 Taper 1 1/4" Horizontal Milling Machine Arbor, Length from face of holder to Nut end is 20 1/2", Comes with all Spacers as seen in Photo. Real nice condition. Remember Genuine Cincinnati USA.

Bridgeport #3 Right Angle Attachment Accepts R-8 Collets Comes with: Right Angle head R-8 Arbor with spacers and mounting screw Arbor support.

POLAND MILLING ARBOR MODEL No 51A18-4 NMTB 50 1" DIAMETER 18" LONG WORKING AREA COMPLETE WITH MANY EXTRA SPACERS SPACERS HAVE 1" ID and 1 1/2" OD QTY of 3 - 2" LONG QTY of 6 - 1 1/4" LONG QTY of 8 - 3/4" LONG QTY of 6 - 3/8" LONG QTY of 7 - 1/4" LONG QTY of 8 - 1/8" LONG QTY of 1 - .090" LONG QTY of 5 - 1/16" LONG QTY of 1 - .050" LONG

POLAND MILLING ARBOR MODEL No 51A12 NMTB 50 1" DIAMETER 12" LONG WORKING AREA COMPLETE WITH MANY EXTRA SPACERS SPACERS HAVE 1" ID and 1 1/2" OD QTY of 1 - 3" LONG QTY of 4 - 2" LONG QTY of 7 - 1 1/4" LONG QTY of 1 - 1" LONG QTY of 9 - 3/4" LONG QTY of 1 - 1/2" LONG QTY of 7 - 3/8" LONG QTYof 1 - 5/16" LONG QTY of 7 - 1/4" LONG

This machine has been exposed to the weather at some point. Slides have been dismantled, cleaned, lubricated.  Bearings look good.

NMTB 50 taper Big diameter 2.75" Small diameter 1.543" Length 5" draw bar thread 1"-8 Arbor 2" diameter, 29.85" long, 1/2" key slot 2" nut flange 0.707" thick with 1.14" wide slots, diameter 4.5" Overall length 38" Shipping: Winner pays actual shipping cost. There is

NMTB 50 taper Big diameter 2.75" Small diameter 1.543" Length 5" draw bar thread 1"-8 Arbor 1.5" diameter, 34.25" long, 3/8" key slot 1-5/8" nut flange 1.04" thick with 1.14" wide slots, diameter 3.99" Overall length 43.25" Shipping: Winner pays actual shipping cost. There is

NMTB 50 taper Big diameter 2.75" Small diameter 1.543" Length 5" draw bar thread 1"-8 Arbor 1.5" diameter, 18" long, 3/8" key slot 1-3/4" nut flange 0.463" thick with 1.04" wide slots, diameter 3.93" Overall length 25.5" Shipping: Winner pays actual shipping cost. There is

NMTB 50 taper Big diameter 2.75" Small diameter 1.543" Length 5" draw bar thread 1"-8 Arbor 1.5" diameter, 29.75" long, 3/8" key slot 1-5/8" nut flange 0.55" thick with 1.04" wide slots, diameter 4.09" Overall length 37.25" Shipping: Winner pays actual shipping cost. There is

This is from the same shop as is the end mills with the surface rust. Very Nice HS 41-1/4 B20-3 40 taper Arbor. Look in the 2013/2014 MSC Catalog Page 1253 and you will find #08242455 with only a couple spacers.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?