atlas grinder for sale, brand-new and used.

DESCRIPTION: USED, ID GRINDING SPINDLES. THEY CAME OUT OF A GRINDING SHOP. LOOK AT THE PICTURES.

DESCRIPTION: USED, SWIVEL BASE. THE MACHINE DIAMETER IS 5 7/8 APPROX. THE STUD IS 7/8 D X 1/2" H.

DESCRIPTION: USED, ARBOR NUTS AND FLANGES FOR THE OLDER DELTA MILWAUKEE 6" CARBIDR GRINDER. LOOK AT THE PICTURES. .

DESCRIPTION: USED, BROWN AND SHARPE AND OTHER ID SPINDLES. LOOK AT THE PICTURES. THE AUCTION IS FOR ALL.

DESCRIPTION: USED, BROWN AND SHARPE 510 MANGETIC CHUCK. THE WORK SURFACE MEASURES 5 1/2 X 10 1/4 APPROX. THE HEIGHT OF THE CHUCK IS 3 1/4 APPROX.

DESCRIPTION: USED, WORKING, SWITCH FOR THE 1 PHASE 6" DELTA CARBIDE GRINDER. THE SWITCH IS RATED 220V; 1HP; 1PHASE. THERE ARE SCUFFS AND SCRATCHES FROM USE.

DESCRIPTION: USED, OLIVER 585 NAME PLATE. IT MEASURES 3X5 . .

DESCRIPTION: USED, OLIVER 585 GRINDER GUARD WITH WORK STOP; ARBOR NUTS; TABLE LOCKS AND WATER POT LIDS AND WICKS. . .

"FOREDOM # 30 " THIS IS A FLEXABLE SHAFT CABLE GRINDER THAT HAS A # 0 THREE JAW HAND CHUCK THAT WILL ACCEPT GRINDER & CUTTER BITS OF 5/32" SHAFT SIZE OR LESS . COMES WITH A VARIABLE SPEED FOOT SWITCH & METAL CASE WITH SOME ASSORTED BITS . TOOL HOLDER IS 1" DIAMETER & 5" LONG FITS NICELY IN YOUR HAND OR CAN BE ADAPTED EASILY TO YOUR ATLAS OR SOUTHBEND LATHE WITH A "T" STYLE BAR FOR THE LANTERN & WEDGE ON THE COMPOUND .

DESCRIPTION: USED, MACHINE SHOP MADE, EYESHIELDS. THE FRAMES MEASURE 6 7/16 X 4 3/4. THE MOUNT RODS MEASURE 3/16 APPROX.

DESCRIPTION: USED, 3, METAL BLAST GATES. . .

DESCRIPTION: USED, GRINDING WHEEL DRESSER. THE SHOP THAT IT CAME FROM HAD LARGE LANDIS GRINDERS. I DO NOT KNOW WHO MADE IT OR WHAT MODEL IT GOES TO.

DESCRIPTION: USED, NO NAME, WHEEL DRESSER. THE POINT IS 5/16 DIAMETER. THE DISTANCE TO THE CENTER IS 2 5/16 APPROX.

DESCRIPTION: USED, UNABLE TO TEST, ELECTOMAGNETIC CHUCK. IT CAME IN A BOX OF TOOLING. I COULD NOT FIND THE CONTROLLER FOR IT.

DESCRIPTION: USED, MIGHT BE NEW, SPINDLE. IT CAME FROM A SUPPORT CABINET FOR A BRYANT CENTER HOLE GRINDER. THE SHAFT AT THE TOP IS 3/8" DIAMETER.

DESCRIPTION: USED, MIGHT BE NEW, PULLEY. IT CAME FROM A SUPPORT CABINET FOR A BRYANT CENTER HOLE GRINDER. THE PULLEY IS 1 3/8 THICK APPROX.

DESCRIPTION: USED, MIGHT BE NEW, PULLEY. IT CAME FROM A SUPPORT CABINET FOR A BRYANT CENTER HOLE GRINDER. THE PULLEY IS 1 3/8 THICK APPROX.

DESCRIPTION: USED, MIGHT BE NEW, PULLEY. IT CAME FROM A SUPPORT CABINET FOR A BRYANT CENTER HOLE GRINDER. THE PULLEY IS 1 3/8 THICK APPROX.

DESCRIPTION: USED, WHEEL DRESSER. THERE IS NO NAME ON THE FIXTURE. LOOK AT THE PICTURES.

DESCRIPTION: USED, SOME SORT OF FIXTURE. IT CAME WITH A BOX OF PARTS FOR A CINCINNATI CUTTER GRINDER. THE CASTING IS 7" H; 8 3/8 HIGH INCLUDING THE STEEL BRACKET ON THE TOP.