auburn 1-3 for sale, brand-new and used.

DELTA RC-63D 24" PLANER 10 HP MOTOR 24" WIDTH CAPACITY 1988 220V 3 PHASEREF#CSR486 *THIS ITEM WILL REQUIRE FREIGHT SHIPPING. PLEASE CONTACT PRIOR TO PURCHASE. ALL SHIPPING COSTS WILL BE PAID FOR BY THE BUYER*

Sprinkler Heads 1/2" F996 K=5.55 Sidewall 212 Deg 458A New out of Box - As Pictured Auction is for 4 pieces as pictured Please feel free to ask questions.

var itemNumber = window.ebayItemID ?

Three @ 3/4" and 1@ 7/8" barley used unibor cobalt

Specifications: Broach cutting using these cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid drill, these cutters removes only the periphery of the hole, ejecting a slug at the end of the

UP FOR BID IS A WATER WELL DRILL REAMER WITH A NOMINAL DIAMETER OF 4 1/4 INCHES. THIS REAMER IS NEW OLD STOCK. IT HAS SIX (6) COATED TIPPED WINGS AND HAS A 3/4 INCH PIPE THREAD FEMALE CONNECTOR.

UP FOR BID IS A USED INGERSOLL SIDE MILLING CUTTER MAX-I-PEX 36W6F0416-02 59177 HOLDER WITH CARBIDE CUTTING BITS. SHAFT DIAMETER: 1 1/4 INCHES WITH TWO OFF SET KEY WAYSKEY WAY: .360 WIDTH24 CARBIDE BITS WHEEL IS APPROX. .920 THICK 36W6F0416-02 59177U.S.PAT.NO 3,662,444NO.

Specifications: Broach cutting using these cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid drill, these cutters removes only the periphery of the hole, ejecting a slug at the end of the

var itemNumber = window.ebayItemID ?

Bendix Besly Tap 1-8 NC GH4 Plug 4 Flutes Made In USA Cutter is chipped at the bottom. 3.5" overall length.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Thus is an original T-bolt for the KO Lee tool & cutter grinder tail stock. The thread is 3/8" - 16 and the length is 2 1/2". If you have any questions please feel free to ask.

This listing is for two KO Lee T-bolts for the tool & cutter grinders. These are 3/8" - 16 thread and are 1 1/2" long. I believe that they are the table stop bolts.

Micrometer Holder This is a weighted heavy sturdy stand to hold a micrometer. This enables you to have your hand

This sale is for ONE LOT of TWO previously owned COPIES (original not a photocopy) of: 1) Lipe-Rollway Corp, "HANDI-HACK PORTABLE POWER HACKSAW", (Syracuse 19??) 4 page flyer that is a little dirty and has an old dealer stamp on the back. Please note that 1/4 hp has been crossed out in ink and changed with 1/3 hp. Displayed are images with machine features, specifications and benefits listed.

1-2-3 (1) PAIR TRI BLOCKS (FACTORY DIRECT) with wood box Hardened steel and ground on all six sides We also sell 2-3-4 Blocks

3/16" & 1/2 x 1" & 1 1/4 Tall (4) Pair of Machinist Steel Parallels (1) pair 6" long x 3/16 x 1" tall (1) pair 6" long x 3/16 x 1 1/4 tall (1)