aws a5 20 for sale, brand-new and used.

As Pictured:

(1) NEW 2 LB Spool Techniweld USA .030 Welding Wire, Self Shielding Flux Core, E71T-GS. This is very high quality wire and provides a surprisingly nice weld for self shielding flux core welding. NO GAS REQUIRED!

E71T-11 is a self-shielding flux cored wire used for welding carbon steels. This product does not require a shielding gas and can be used in limited multi-pass welding operations. The bead appearance is not equal to a gasshielded product, but the benefits of not having to use gas makes this product popular.

ER4043 is a general-purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloy contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking.

var itemNumber = window.ebayItemID ?

E7018/E7018-1 is a low-hydrogen iron powder type electrode that produces high quality X-ray welds. It can be used in all positions on AC or DC reverse polarity welding current. E7018/E7018-1 is recommended for welding medium grade carbon steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional electrodes.

E6013 is a mild-steel, all position, general purpose cellulose-base rod. It operates on AC or DC welding current and works well on low voltage AC machines. E6013 is an excellent choice where there is poor fit-up in the joint.

E6013 is a mild-steel, all position, general purpose cellulose-base rod. It operates on AC or DC welding current and works well on low voltage AC machines. E6013 is an excellent choice where there is poor fit-up in the joint.

Welding Wire 0.35" inch Flux Core Gasless USA Made AWS Flux Core Gasless Welding Wire, .035" 0.58MM, 2lb/0.9k

This listing is for a 10-pound spool of Washington Alloy .030" E71T-GS. What you see in the picture is what you get.

ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding.

ER316/316L is used for welding types 316 and 316L stainless steels. It has a maximum carbon content of .03% to reduce the possibility of formation of intergranular carbide precipitation. This low carbon alloy is not as strong as 316H at elevated temperatures.

ER316LSI is similar to ER316L with an increased silicon content that drastically improves the wetting characteristics of the weld producing a very smooth bead. This product is used in applications where a good cosmetic appearance is important. AWS Specification AWS A5.9/A5.9M:2006 AWS Classification ER316LSI Welding Current

ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding.

Alloy ER1100 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and is used extensively in thin gauge and foil products. It has good welding characteristics and it is also used as a filler alloy for welding purposes.

This listing is for a 10-pound spool of Washington Alloy .035" E71T-GS. What you see in the picture is what you get.