ball bearing pulley for sale, brand-new and used.

Up for Auction is a USED Campbell Okmulgee, OK, Wire or Rope Pulley Block - Combination Type Pulley. Has a 3,000 pound working load, weighs about 8 lbs, made of aluminum alloys with steel shafts and bearings. This is a Heavy Duty Professional / Industrial / Utility tool used when installing the large wires onto electrical poles in our neighborhoods and for threading wire or rope overhead from pole to pole, building to building or tree to tree.

ebay

2010UD6G.13.40 New Sanyo Denki, Ball Bearing, 2 Phase, 42MM Sq. (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for a Factory Tray of (20) Motors.

2018UD6G.2.96 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2013UD6G.3.12 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 04A, or 548001016, or 548-001-016. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2020UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

Dunkermotoren Brushed 24 Volt Permanent Magnet DC Electric Motor Details Dunkermotoren Model: GR42x25 Brand new stock 24 Volt 860 mA 14 Watts 3600 RPM rated High-torque Ball-bearing design for long life 3.5" Length x 1.69" Diameter Small pulley mounted on shaft Shaft diameter is 3mm Pulley diameter is 8mm Threaded mounting holes Twisted pair

2019UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

4000 RPM Buhler Permanent Magnet 24 V DC Hobby Motor with Large Grooved Pulley New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 4 - 24 VDC No load speed at 24 VDC: 4,000 RPM No load current: 330 mA Starting current: 14.5 A Can be operated in either direction: simply reverse polarity of power supply Shaft dimensions: 14 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 9 mm Long x 25 mm Diameter Aluminum pulley features 4 grooves Dimensions (not in

Baldor Motor, 15HP,1200RPM,3PH,60HZ,284T,TEFC, Features: 1.15 Service Factor Corrosion resistant epoxy finish Regreasable ball bearings Oversized rotatable cast iron conduit box Forsheda® shaft seal Moisture resistant copper windings Class F insulation Stainless steel nameplate and corrosion resistant harware Tropicalized Typical Applications: Typical applications include petro-chemical plants, mines, foundries, pulp and pape

This is a Walker-Turner (WT) Driver Line "Custom Built Ball Bearing" Motor from the late 1940's, Catalog No. 9331, manufactured by the Walker-Turner Division, Kearney & Trecker Corp, Plainfield NJ. It's in super-nice condition.

You are Looking at a USED DAYTON 3 PHASE 1-1/2 HP 3450 RPM ELECTRIC MOTOR OPERATES ON 208/220/460 VOLT. INCLUDES 3" BROWNING CAST IRON PULLEY . MOTOR IS TOTALLY INCLOSED FAN COOLED 56-H FRAME .

Product Description Ansul Corner Pulley "High Temperature" corner pulley. One pulley classified for all systems. Steel compression nuts eliminate stripping.