bearing pulley for sale, brand-new and used.

This Sale Is For A Laboratory Surplus Robotics Twin Belt Idler Pulley Bearing Block Assembly Mount For Automation. The Pin At The Base Is 10mm In Diameter And At The Top 1/2" In Diameter. It Is About 2 5/8" Long From The Top Of The Clip To The Top Of The Shaft.

This Sale Is For A Laboratory Surplus Robotics Belt Idler Pulley Bearing Block Assembly Mount For Automation. The Pin Is 10mm In Diameter And About 29mm Long From The Top Of The Clip To The Top Of The Shaft. This Item Is In Excellent Operational And Great Cosmetic Condition.

This Sale Is For A Laboratory Surplus Robotics Belt Idler Pulley Bearing Block Assembly Mount For Automation. The Pin Is 10mm In Diameter And About 29mm Long From The Top Of The Clip To The Top Of The Shaft. It Includes The Large Cam Gear In The Pictures.

New old stock Ford tractor 9N 2N idler pulley bearing 9N8685A. Bantam bearing # 122016. Yes I combine shipping.

STIHL

Offering a low speed spindle pulley for an Rockwell Delta DP220 14" drill press Good pulley, bearing feels smooth, Large OD is 7-1/2", small is 4-3/4" Any questions: e-mail lathemill@juno.com , or call 724 882 6449 I have many parts for drill presses, Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases

BEARING FOR CLARKE EZ-8 DRUM SHAFT Unless your old flanges are bent or broken, you can save considerably by re-using them; there is no reason to pay for the whole assembly when you can replace just the bearing. (If you need the whole bearing, including the flange, we carry that as well.) This is

BEARING FOR CLARKE EZ-8 DRUM SHAFT This is a premium bearing with a heavier-duty flange--it weighs 3 1/2 ounces more than Clarke's stock bearing assembly (see comparison in second photo above), but is still a perfect fit.

BEARING FOR CLARKE EZ-8 DRUM SHAFT Unless your old flanges are bent or broken, you can save considerably by re-using them; there is no reason to pay for the whole assembly when you can replace just the bearing. This is a premium bearing with dual-lip seals--very important considering the du

2018UD6G.2.96 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2013UD6G.3.12 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 04A, or 548001016, or 548-001-016. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2020UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

Dunkermotoren Brushed 24 Volt Permanent Magnet DC Electric Motor Details Dunkermotoren Model: GR42x25 Brand new stock 24 Volt 860 mA 14 Watts 3600 RPM rated High-torque Ball-bearing design for long life 3.5" Length x 1.69" Diameter Small pulley mounted on shaft Shaft diameter is 3mm Pulley diameter is 8mm Threaded mounting holes Twisted pair

2019UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

4000 RPM Buhler Permanent Magnet 24 V DC Hobby Motor with Large Grooved Pulley New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 4 - 24 VDC No load speed at 24 VDC: 4,000 RPM No load current: 330 mA Starting current: 14.5 A Can be operated in either direction: simply reverse polarity of power supply Shaft dimensions: 14 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 9 mm Long x 25 mm Diameter Aluminum pulley features 4 grooves Dimensions (not in

This auction is for one 2 HP Electric Doerr Motor, Model # LR22132, RPM 3450, 12 AMPS, 230 LO Volts (can be converted to 115 volts), 1 Phase, HZ-60, FR-H56, CODE-J, DUTY-CONT, INS CLASS-BR, MAX. AMB.-40, 5/8" shaft. This motor was used very little.

The Dia of pulley is 5 1/8" uses 1/2" wide belt, Pulley is used and has new bearing

CMI RC103 PULLEY Famous original blue pulley. Anodized aluminum sideplates, 2 3/8 inch aluminum sheave, sealed-needle bearing and stainless steel axle. 5/8 inch rope capacity.